Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
ホーム >>> MINILOGIC >>> ML1001-1U データシート

ML1001-1U データシート

部品番号コンポーネント説明メーカー
ML1001-1U ML1001 Series Static LCD COG Driver MINILOGIC
Minilogic Device Corporation Limited MINILOGIC
Other PDF  not available.
PDF DOWNLOAD     
ML1001 image

General Description
ML1001 static LCD COG (chip on glass) driver is 40 segments LCD driver with gold bump. It can be cascaded to form a single piece of 80 or 120 segments LCD drivers. It targets at custom TN LCD COG Module product which requires the best quality of TN LCD technology. With the use of ML1001 series driver, it offers the best contrast, the widest viewing angle, the widest range of operating voltage and the widest range of operating temperature when compared to the multiplex method.
Our ML1001 includes an internal 32kHz oscillator, a 40-bit shift register, a 40-bit data register, a 16-bit segment driver, a 24-bit segment driver, two common drivers, a blink control circuit, a power-up reset circuit and a frequency divider which offer the necessary clock signals for Blink control, segment & common driver circuit.
Through the DIN pin, the display data is serially shifted into the 40-bit shift register at the rising edge of DCLK signal. The display data, which is going to be displayed on the attached LCD, is then stored in the 40-bit data register at the rising edge of the LOAD signal.
Other features like blinking of the display data by the BEN and BCLK, disable the internal oscillator by the OEN, input an external clock signal to the FIN, and enable or disable the segment and common driver by the SEN1, SEN2, CEN1A and CEN1B, are included.

Features
● A Gold Bump Chip without external component.
● Logic & LCD power supply: 2.0V to 6.0V
● Typical Current consumption: 25uA at VIN = 3V & no load condition.
● Number of segments: 40
● Cascade the ML1001 to form a single piece of 80 or 120 segments LCD driver.
● Simple 3 pin microcontroller interface through DIN, DCLK & LOAD.
● Blink of the display data.
● Offer best contrast and widest viewing angle of TNLCD technology.
● No temperature compensation needed for Topr = -40oC to 80oC.

Application
♦ Instrument LCD Module
♦ Telephone LCD Module
♦ Automotive LCD Module
♦ Handheld Device LCD Module

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14 
 

ML1001-1U に関連する他のメーカーを検索

部品番号コンポーネント説明PDFメーカー
COG-VL248160 248x160 dots, FSTN, black & white, positive, transflective, LCD graphic module. ビュー Varitronix international limited
BO320240B COG package LCD driver only ビュー BOLYMIN Inc
COG-VLGT6566-04 LCD Module Type ビュー Varitronix international limited
BO6464A FSTN Transflective LCD, COG package Built-in driver PCF8548, serial I2C data bus ビュー BOLYMIN Inc
BD9206EFV LED Driver Series for LCD Backlight Simple Structure Constant Current Backlight Driver for LCD panels (Non-step type) ビュー ROHM Semiconductor
MSM5221 56-DOT STATIC LCD DRIVER ビュー Oki Electric Industry
MSM58292 5-DIGIT STATIC LCD DRIVER ビュー Oki Electric Industry
COG-T240MCQ-01 SPECIFICATION OF MODULE ビュー Varitronix international limited
COG-C177MVH MODULE SPEC ビュー Varitronix international limited
S-00201G LCD BACK LIGHT, COG TYPE ビュー Para Light Electronics

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]