Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N +説明+コンテンツ検索

検索ワード :
ON-Semiconductor
ON Semiconductor
コンポーネント説明 : power supply & management IC for Handheld Electronic Products

power supply & management IC for Handheld Electronic Products

The MC34280 is a power supply integrated circuit which provides two boost regulated outputs and some power management supervisory functions. Both regulators apply Pulse–Frequency–Modulation (PFM). The main step–up regulator output can be externally adjusted from 2.7V to 5V. An internal synchronous rectifier is used to ensure high efficiency (achieve 87%). The auxiliary regulator with a built–in power transistor can be configured to produce a wide range of positive voltage (can be used for LCD contrast voltage). This voltage can be adjusted from +5V to +25V by an external potentiometer; or by a microprocessor, digitally through a 6–bit internal DAC.

FEATURES:
• Low Input Voltage, 1V up
• Low Quiescent Current in Standby Mode: 35µA typical
• PFM and Synchronous Rectification to ensure high efficiency (87% @200mA Load)
• Adjustable Main Output: nominal 3.3V @ 200mA max, with 1.8V input
• Auxiliary Output Voltage can be digitally controlled by microprocessor
• Auxiliary Output Voltage:
    +5V @ 25mA max, with 1.8V input
    +25V @ 15mA max, with 1.8V input
• Current Limit Protection
power–ON Reset Signal with Programmable Delay
• Battery Low Detection
• Lithium Battery Back–up
• 32–Pin LQFP Package

APPLICATIONS:
• Digital Organizer and Dictionary
• Personal Digital Assistance (PDA)
• Dual Output power supply (For MPU, Logic, Memory, LCD)
• Handheld Battery powered Device (1–2 AA/AAA cell)

部品番号(s) : LC4120NV
SANYO
SANYO -> Panasonic
コンポーネント説明 : LCD power supply Switching IC

Overview
The LC4120NV is an LCD power supply switching IC that provides 3 input channels and 6 output channels. It is fabricated in an 80-V high-voltage CMOS process and features low power dissipation, high speed, and a low output impedance. This IC is optimal for switching the row driver LCD drive voltage in a wide range of LCD products.

Features
• 3 input channels/6 output channels
• Logic voltage: 2.7 to 5.5 V
• Output voltage: 80 V (maximum)
• Output impedance: 110Ω (maximum) (When VHA – VLA = 60 V)
• Output delay time: 0.5 µs (maximum)
• Operating temperature: –20 to 75°C
• Package: 20-pin SSOP

部品番号(s) : BP320240A
BOLYMIN
BOLYMIN Inc
コンポーネント説明 : FSTN LCD, TAB IC and PCB package LCD driver only (Recommending SED1335 controller)

Feature

1. FSTN LCD, TAB IC and PCB package

2. LCD driver only (Recommending SED1335 controller

3. +3V single power supply,

4. 4 bit data bus

5. 1/240 duty cycle

6. Option: EL B/L , EL inverter

7. Option: Touch panel

7. Option: Positive voltage for LCD driving


部品番号(s) : BP240160C
BOLYMIN
BOLYMIN Inc
コンポーネント説明 : FSTN LCD, TAB IC and PCB package LCD driver only

Feature

1. FSTN LCD, TAB IC and PCB package

2. LCD driver only (Recommending SED1335 controller

3. +3V ~ +5V single power supply,

7. Option: built-in positive voltage for LCD driving

4. 1/160 duty cycle

5. Option: LED edge B/L, EL B/L , EL inverter

6. Option: Touch panel

 



 


部品番号(s) : FM6316CE
Unspecified1
Unspecified
コンポーネント説明 : Dedicated mobile power management IC

FM6316CE is a used in mobile power integrated lithium battery charge management, DC-DC step-up current limiting and load sensing functions in one portable power management IC.



FM6316CE including integrated trickle charge, constant current charging and constant voltage charging charging the whole process, and contains the charging process and the end of charging status indicator Lamp; the system will be shut down in a charged state output discharge path; when the external input supply is removed, FM6316CE battery-powered external device, if  Did not detect the external device access, the system enters standby mode, the entire system standby current 16uA.




部品番号(s) : UPD161660 UPD161660P
NEC
NEC => Renesas Technology
コンポーネント説明 : power supply FOR TFT-LCD DRIVER

DESCRIPTION
The µPD161660 is a power supply IC for TFT-LCD driver. This ICs can generate the levels which TFT-LCD driver need, from 2.7 V.

FEATURES
• To generate 3 levels from single voltage input
• To integrate regulator circuit for source and gate driver

部品番号(s) : UR8HC007-0A4-FQ
Semtech
Semtech Corporation
コンポーネント説明 : Zero-power™ Input Device and power management IC

DESCRIPTION
The JunoTM A4 is a member of a series of input device and power management companion ICs for RISC-based portable systems. On a single IC, the JunoTM A4 integrates control of any 4-wire or 8-wire resistive touch screen, keyboard scanning, unique power management capabilities, a direct PS/2 port and plenty of General Purpose Input / Output (GPIO).

FEATURES
• Typically consumes less than 1µA
• Scans an 8 x 16 keyboard matrix that supports Japanese, English and European keyboards
• Interfaces any four-wire or eightwire resistive touch screen
• Operates continuously between 3 Volts and 5 Volts
• Offers unique power management capabilities that work in harmony with Windows® CE power modes
• Always runs in "Stop" mode without data or event loss
• Provides a direct Zero-powerTM PS/2 port for the hot-plug connection of an external keyboard or mouse
• Uses proprietary circuitry, so “Stop” mode is entered even when PS/2 device is connected & active
• GPIO pins provide interrupt at both falling and rising edge of signals, ideal for lid functions, power, ring indicators, docking signals, battery measurement, etc.
• Has additional GPIO available for LEDs, switches, etc.
• Offers internal control of LCD brightness/contrast, audio, etc. as well as four 10-bit A/D channels for power management monitoring
• Provides programmable features that allow for maximum design differentiation without customization
• Cost-effective, reducing overall system costs by integrating features that would typically require multiple components
• Available in 80-pin 13 x 13 mm, 1.7mm high package to accommodate slim designs

APPLICATIONS
• Jupiter-class devices
• Professional H/PCs
• H/PCs
• Web Phones, G3 Terminals

Semtech
Semtech Corporation
コンポーネント説明 : Zero-power™ Keyboard Encoder & power management IC for H/PCs

DESCRIPTION
The SPICoderTM UR5HCSPI keyboard encoder and power management IC is designed specifically for handheld PCs (H/PCs). The off-the-shelf UR5HCSPI will readily work with CPUs designed for Windows CE®, saving OEMs significant development time and money as well as minimizing time-to-market for the new generations of handheld products.

FEATURES
• SPI-compatible keyboard encoder and power management IC with other interfaces available
• Compatible with Windows CE® keyboard specification
• Zero-powerTM — typically consuming less than 2µA, between 3-5V
• Offers overall system power management capabilities
• Compatible with “system-on silicon” CPUs for H/PCs
• Special keyboard and power management modes for H/PCs, including programmable “wake-up” keys
• Scans, debounces, and encodes an 8 x 12 matrix and controls discrete switches and LED indicators
• Custom versions available

APPLICATIONS
• StrongARMTM Handheld PCs
• Windows CE® Platforms
• Web Phones
• Personal Digital Assistants (PDAs)
• Wearable Computers
• Internet Appliance

NEC
NEC => Renesas Technology
コンポーネント説明 : power supply FOR TFT-LCD DRIVER

DESCRIPTION
The µPD161661 is a power supply IC for TFT-LCD driver. This ICs can generate the levels which TFT-LCD driver need, from single voltage input.

FEATURES
• To generate 3 levels from single voltage input
• To integrate regulator circuit for source driver

部品番号(s) : PCF50603 PCF50603HN
Philips
Philips Electronics
コンポーネント説明 : Controller for power supply and battery management

GENERAL DESCRIPTION
The PCF50603 is a highly integrated solution for power supply generation, battery management including charging and a SIM card interface including supply generation. The device is controlled by a host controller via a 400 kHz I2C-bus serial interface.

APPLICATIONS
• Mobile phones.

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]