Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N +説明+コンテンツ検索

検索ワード :
部品番号(s) : SII9287B SII9287BCNU
Unspecified
Unspecified
コンポーネント説明 : HDMI Port Processor with InstaPort Viewing Technology

[Silicon Image, Inc.]

Introduction
The SiI9287B HDMI Port Processor with InstaPort Viewing Technology is the second generation of HDMI® devices that supPort the HDMI Specification.
With four HDMI inputs and a single output, the SiI9287B Port Processor enhances the functionality of digital TVs using single system on a chip (SoC) solutions with integrated HDMI receivers. The Port Processor provides a simple, low-cost method of retransmitting digital audio and video to give consumers a truly all-digital experience. Built-in backward compatibility with DVI 1.0 allows HDMI systems to connect to any DVI 1.0 source.

Features
The SiI9287B device brings cutting edge innovations, such as:
• InstaPort™ viewing technology that reduces Port
   switching time to less than one second
• Enhanced cable equalization for long cable
   supPort, even at Deep Color resolutions that
   enables the SiI9287B device to work with noisy
   signals and many sources, making the sink devices
   highly interoperable
• Integrated EDID and CEC functions
• Improved ESD protection on all signals connected
   to the HDMI connector.
  
HDMI Inputs and Output
Four HDMI input Ports and single output Port supPort:
HDMI, HDCP, and DVI compatibility
• TMDS™ cores run at 25–225 MHz
• SupPorts video resolutions up to 1080p, 60 Hz, 12-
   bit or 720p/1080i, 120 Hz, 12-bit.

Control Capability
• Consumer Electronics Control (CEC) interface
   Incorporates an HDMI-compliant CEC I/O and an
   integrated CEC Programming Interface (CPI);
   these simplify design and lower cost and software
   overhead
• Integrated EDID and DDC supPort for 4
   HDMI/DVI Ports and 1 VGA Port with a 256-byte
   NVRAM shared between Ports that loads into
   separate 256-byte SRAM for each of 5 Ports
• Individual control of Hot Plug Detect (HPD) for
   each of the 4 HDMI/DVI Ports
• TPWR (TMDS clock detect) output to help speed
   soft mute of audio while plugging and unplugging
   cables
• Controllable by the local I2C bus.

Power Management
• Flexible power management provides extremely
   low standby power consumption
• Standby power can be supplied from an HDMI 5-V
   signal or from a separate +3.3 V or 5 V standby
   power pin
Port power only can be used to read EDID
• Single power 3.3-V source
• Integrated 5 V to 3.3 V Voltage regulator.

Package
• 72-pin, 10 mm x 10 mm, 0.5 mm pitch QFN
   package with enhanced ePad™.

部品番号(s) : SII1292
ETC1
Unspecified
コンポーネント説明 : MHL™/HDMI®-to-HDMI Bridge

[Silicon Image]

Single-Port, auto-sensing, MHL/HDMI-to-HDMI bridge device for HD audio and video connectivity to HDTVs, PC monitors, projectors, and multi-function monitors (MFMs)

The SiI1292 enables an existing HDMI input to upgrade to a low-power, auto-sensing MHL/HDMI input solution, which facilitates HD audio and video connectivity between MHL-enabled mobile devices and HDTVs, PC monitors, projectors and MFMs.

Key Features
◆ Dual-mode MHL or HDMI input
◆ Adaptive equalizer for HDMI long-cable supPort
◆ Low BOM cost

Benefits Summary
◆ Low-power consumption
◆ Small package
◆ Adds MHL to one HDMI Port

Applications
◆ MHL-enabled HDTVs
◆ MHL-enabled PC Monitors
◆ MHL-enabled Projectors
◆ MHL-enabled MFMs

Industry-Standard Compliance
HDMI 1.4
◆ MHL

部品番号(s) : SII1292 SII1292CNUC
SILICONIMAGE
Silicon image
コンポーネント説明 : MHL Bridge and HDMI Monitor Receiver

General Description
The SiI1292 MHL Bridge and HDMI Monitor Receiver facilitates the design of low-pin count, low-power mobile-to-standard HDMI®-interoperable applications.
The Silicon Image Mobile High-definition Link (MHL™) technology carries formatted video and audio from compatible transmitters, using only 3 signal lines, power, and ground (5 pins total) compared to the 19 pins required for the standard High Definition Multimedia Interface (HDMI).
As an MHL bridge, the SiI1292 device supPorts a single MHL input to provide MHL capability in computer or multimedia display devices.

Features
● The MHL input function of the bridge receives
   data over a single differential pair instead of four pairs
● A single-wire control bus supPorts all sideband
   signaling for DDC, Remote Control, and Hot Plug
   Detect (HPD)
● The bridge converts data received in the MHL
   format to standard HDMI, and supPorts all
   resolutions ranging from 25 MHz to 75 MHz
HDMI receiver mode supPorts all resolutions
   between 25–225 MHz Including 1080p60 12-bit Deep Color

The combined transmitter and bridge implements a total A/V interface solution with the following features:
● I2C interface for configuration by local microcontroller
● Built-in adaptive equalizer for long cable supPort on HDMI
HDMI and DVI 1.0 transmitter compatibility
● Low power 1.2 V core
● 40-pin QFN, 6 mm x 6 mm body size
● Extended commercial temperature range
   (–20 C to +85 °C).

CALMIRCO
California Micro Devices Corp
コンポーネント説明 : HDMI Transmitter Port Protection and Interface Device

Product Description
The CM2020 HDMI Transmitter Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection. An integrated package provides all ESD, level shift,
overcurrent output protection and backdrive protection for an HDMI Port in a single 38-Pin TSSOP package.

Features
• 0.05pF matching capacitance between the TMDS intra-pair
• Overcurrent output protection
• Level shifting circuitry, Including ±8kV ESD protection on all TMDS lines
• Matched 0.5mm trace spacing (TSSOP)
• Simplified layout for HDMI connectors
• Backdrive protection

Applications
• PC
• Consumer Electronics
• Set Top Box
• Displays and Digital Television

ADI
Analog Devices
コンポーネント説明 : APIX2 Transmitter with Dual Port HDMI and HDCP SupPort

APIX2 Transmitter with Dual Port HDMI and HDCP SupPort

APPLICATIONS
    Automotive infotainment
    Infotainment head units
    Rear seat entertainment systems
    Automotive media Port applications
    HDMI repeaters and video switches

部品番号(s) : CM2030 CM2030-A0TR
CALMIRCO
California Micro Devices Corp
コンポーネント説明 : HDMI Transmitter Port Protection and Interface Device

Product Description
The CM2030 HDMI Transmitter Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection.
An integrated package provides all ESD, slew rate limiting on CEC line, level shifting/isolation, overcurrent output protection and backdrive protection for an HDMI Port in a single 38-Pin TSSOP package.

Features
HDMI 1.3 compliant
• SupPorts thin dielectric and 2-layer boards
• Minimizes TMDS skew with 0.05pF matching
• Long HDMI cable supPort with integrated I2C accelerator
• Active termination and slew rate limiting for CEC
• SupPorts direct connection to CEC microcontroller
• Integrated I2C level shifting to CMOS level Including low logic level voltages
• Integrated 8kV ESD protection and backdrive protection on all external I/O lines
• Integrated overcurrent output protection per HDMI 1.3
• MultiPort I2C supPort eliminates need for analog mux on DDC lines
• Simplified layout with matched 0.5mm trace spacing

Applications
• PC and consumer electronics
• Set top box, DVD RW, PC, graphics cards

部品番号(s) : UPD7281 UPD7281D
NEC
NEC => Renesas Technology
コンポーネント説明 : Image Pipelined Processor

Description
The NEC μPD7281 Image Pipelined Processor is a high-speed digital signal Processor specifically designed for digital Image processing such as restoration, enhancement, compression, and pattern recognition.

Applications
□ Digital Image restoration
□ Digital Image enhancement
□ Pattern recognition
□ Digital Image data compression
□ Radar and sonar processing
□ Fast Fourier Transforms (FFT)
□ Digital filtering
□ Speech processing
□ Numeric processing

CALMIRCO
California Micro Devices Corp
コンポーネント説明 : HDMI Receiver Port Protection and Interface Device

Product Description
The CM2021 HDMI Receiver Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection.

Features
• 0.05pF matching capacitance between the TMDS intra-pair
• Level shifting circuitry, Including ±8kV ESD protection on all TMDS lines
• Matched 0.5mm trace spacing (TSSOP)
• Simplified layout for HDMI connectors
• Backdrive protection

Applications
• PC
• Consumer Electronics
• Set Top Box
• Displays and Digital Television

部品番号(s) : CM2031 CM2031-A0TR
ON-Semiconductor
ON Semiconductor
コンポーネント説明 : HDMI Receiver Port Protection and Interface Device

Product Description

The  CM2031  HDMI  Receiver  Port  Protection  and Interface  Device  is  specifically  designed  for  next generation HDMI Sink interface protection.

An  integrated  package  provides  all  ESD,  slew  rate limiting  on  CEC  line,  level  shifting/isolation  and backdrive  protection  for  an  HDMI  Port  in  a  single  38- Pin TSSOP package.



Features

•  HDMI 1.3 compliant

•  SupPorts thin dielectric and 2-layer boards

•  Minimizes TMDS skew with 0.05pF matching

•  Long HDMI cable supPort with integrated I2C accelerator

•  Active termination and slew rate limiting for CEC

•  SupPorts direct connection to CEC microcontroller

•  Integrated I2C level shifting to CMOS level Including low logic level voltages

•  Integrated ±8kV ESD protection and backdrive protection on all external I/O lines

•  SupPorts active and passive control of hot plug detect signal

•  MultiPort I2C supPort eliminates need for analog mux on DDC lines

•  Simplified layout with matched 0.5mm trace spacing

•  RoHS-compliant, lead-free packaging



Applications

•  PC and consumer electronics

•  Digital TV, PC monitors and projectors


コンポーネント説明 : 10-Bit Integrated, Multiformat SDTV/HDTV Video Decoder, RGB Graphics Digitizer, and 2:1 Multiplexed HDMI/DVI Interface

GENERAL DESCRIPTION

The ADV7441A is a high quality multiformat video decoder and graphics digitizer with an integrated 2:1 multiplexed HDMI™ receiver.

The ADV7441A contains two main processing sections. The first section is the standard definition Processor (SDP), which processes all types of PAL, NTSC, and SECAM signals. The second section is the component Processor (CP), which processes YPrPb and RGB component formats, Including RGB graphics. The CP also processes the video signals from the HDMI receiver. The ADV7441A can keep the HDCP link between a HDMI source and the selected HDMI Port active in analog mode operation. This allows for fast switching between the analog and HDMI modes.



 


12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]