The ADM1023 is a 2-channel digital thermometer and under/overtemperature alarm for use in personal computers and other systems requiring thermal monitoring and management. Optimized for the Pentium® III, the higher accuracy allows systems designers to safely reduce temperature guard banding and increase system performance. The device can measure the temperature of a microprocessor using a diode-connected PNP transistor, which may be provided on-chip with the Pentium® III or similar processors; or it can be a low-cost, discrete NPN/PNP device such as the 2N3904/2N3906.
Features
⢠Next Generation Upgrade of ADM1021
⢠On-Chip and Remote Temperature Sensing
⢠Offset Registers for System Calibration
⢠1°C Accuracy and Resolution on Local Channel
⢠0.125°C Resolution/1°C Accuracy on Remote Channel
⢠Programmable Over/Undertemperature Limits
⢠Programmable Conversion Rate
⢠Supports System Management Bus (SMBus) ALERT
⢠2-Wire SMBus Serial Interface
⢠200 μA Max Operating Current (0.25 Conversions/Second)
⢠1 μA Standby Current
⢠3.0 V to 5.5 V Supply
⢠Small 16-Lead QSOP Package
⢠This is a Pb-Free Package*
Applications
⢠Desktop Computers
⢠Notebook Computers
⢠Smart Batteries
⢠Industrial Controllers
⢠Telecomm Equipment
⢠Instrumentation
|