Philips Semiconductors
Dual-band, CDMA/AMPS downconverter IC
Product specification
SA9502
DESCRIPTION
The SA9502 integrates all the front end receive mixers necessary
for use in dual-band, triple-mode CDMA/AMPS cellular phone
handsets. There are three individual mixer blocks, each optimised
for high linearity with low power consumption for operation in one of
the following modes: High-band 1900MHz PCS CDMA, low-band
800MHz cellular CDMA or analog FM AMPS/TACS modes.
Additionally, the entire circuit can be powered down and put into
sleep mode, reducing the supply current to typically 12 µA. The
circuit has been designed in our advanced QUBiC2 BiCMOS
process with 20GHz fT.
FEATURES
• PCS and cellular downconverter mixers typical performance:
– PCS: Gain=11.1dB, NF=8.4dB, IIP3= +1.8dBm
– CDMA: Gain=11.3dB, NF=9.4dB, IIP3= +5.7dBm
– FM:
Gain= 7.5dB, NF=10.5dB, IIP3= +6.2dBm
• Separate, selectable IF outputs to suit FM and CDMA bandwiths
• PCS mixer LO: direct or via internal frequency doubler
• Switchable wideband LO output buffer
• Low voltage operation down to 2.7V
• Low current consumption in “idle”/receive modes:
– PCS : 14.3mA @ 2.7V
– CDMA: 17.6mA @ 2.7V
– FM:
6.8mA @ 2.7V
• Low standby current in sleep mode, typically 12 µA
• TSSOP20 package
APPLICATIONS
• 800MHz analog FM and CDMA digital receivers
• 1900MHz PCS band CDMA digital recievers
• Supports dual-mode and triple-mode operation
• Digital mobile communications equipment
• Portable, low power radio equipment
ORDERING INFORMATION
EXTENDED
TYPE NUMBER
SA9502DH
PINS
20
PIN POSITION
TSSOP
PACKAGE
MATERIAL
Plastic thin shrink small outline package; body 6.5 x 4.4 x 1.1 mm
CODE
SOT360-1
1999 Mar 19
2
853–2135 21064