RELEASED
PM4354 COMET-QUAD
DATASHEET
PMC-1990315
ISSUE 6
FOUR CHANNEL COMBINED E1/T1/J1
TRANSCEIVER / FRAMER
• Provides ESF bit-oriented code detection and an HDLC/LAPD interface for terminating the ESF facility
data link.
• Supports polled or interrupt-driven servicing of the HDLC interface.
• Extracts the data link in ESF mode and extracts a datalink in the E1 national use bits.
• Extracts 4-bit codewords from the E1 national use bits as specified in ETS 300 233
• Extracts up to three HDLC links, to an H-MVIP Bus, to support the D-channel for ISDN Primary Rate
Interfaces and the C-channels for V5.1/V5.2 interfaces. Detects the V5.2 link identification signal.
• Provides a two-frame elastic store buffer for backplane rate adaptation that performs controlled slips
and indicates slip occurrence and direction.
• Provides DS-1 robbed bit signaling extraction, with optional data inversion, programmable idle code
substitution, digital milliwatt code substitution, bit fixing, and two superframes of signaling debounce
on a per-channel basis.
• Frames to the E1 signaling multiframe alignment when enabled and extracts channel associated
signaling. Alternatively, a common channel signaling data link may be extracted from timeslot 16.
• Indicates signaling state change, and two superframes of signaling debounce on a per-DS0 basis.
• Provides trunk conditioning which forces programmable trouble code substitution and signaling
conditioning on all channels or on selected channels.
• Provides diagnostic, line loopbacks and per-DS0 payload loopback.
• A pseudo-random sequence user selectable from 211 –1, 215 –1 or 220 –1, may be detected in the
T1/E1 stream in either the backplane receive or backplane transmit directions. The detector counts
pattern errors using a 24-bit saturating PRBS error counter.
• Provides four single-rail PCM and signaling data outputs for 1.544 Mbit/s or 2.048 Mbit/s backplane
buses.
1.2 Transmitter section:
• Supports transfer of transmitted single rail PCM and signaling data from 1.544 Mbit/s and 2.048 Mbit/s
backplane buses.
• Generates DSX-1 shorthaul and DS-1 longhaul pulses with programmable pulse shape compatible
with AT&T, ANSI and ITU requirements.
• Generates E1 pulses compliant to G.703 recommendations.
• Provides a digitally programmable pulse shape extending up to 5 transmitted bit periods for custom
long haul pulse shaping applications.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC. AND FOR ITS CUSTOMERS’ INTERNAL USE
3