DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

PM6388-RI データシートの表示(PDF) - PMC-Sierra

部品番号
コンポーネント説明
メーカー
PM6388-RI
PMC-Sierra
PMC-Sierra PMC-Sierra
PM6388-RI Datasheet PDF : 345 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
DATA SHEET
PMC-1971019
ISSUE 6
PM6388 EOCTL
OCTAL E1 FRAMER
1 FEATURES
Integrates eight E1 framers in a single device for terminating duplex E1
signals.
Supports transfer of PCM data to/from 2.048 MHz system-side devices. Also
supports a fractional E1 system interface with independent ingress/egress
fractional E1 rates.
Provides an optional backplane interface which is compatible with Mitel ST®-
bus, AT&T CHI® and MVIP PCM backplanes, supporting data rates of
2.048 Mbit/s and 8.192 Mbit/s. Up to four links may be byte interleaved on
each interface bus with no external circuitry.
Extracts/inserts up to three HDLC links from/to arbitrary time slots to support
the D-channel for ISDN Primary Rate Interfaces and the C-channels for
V5.1/V5.2 interfaces as per ITU-T G.964, ITU-T G.965, ETS 300-324-1, and
ETS 300-347-1.
Provides jitter attenuation in the receive and transmit directions.
Provides per-channel payload loopback and per link diagnostic and line
loopbacks.
Provides an integral pattern generator/detector that may be programmed to
generate and detect common pseudo-random (as recommended in ITU-T
O.151) or repetitive sequences. The programmed sequence may be
inserted/detected in the entire E1 frame, or on a fractional E1 basis, in both
the ingress and egress directions. Each framer possesses its own
independent pattern generator/detector, and each detector counts pattern
errors using a 32-bit saturating error counter.
Provides signaling extraction and insertion on a per-channel basis.
Software compatible with the PM6341 E1XC Single E1 Transceiver, the
PM6344 EQUAD Quad E1 Framer, the PM4388 TOCTL Octal T1 Framer, and
PM4351 COMET Combined E1/T1 Transceiver.
Seamless interface to the PM4314 QDSX Quad Line Interface.
Provides a IEEE P1149.1 (JTAG) compliant test access port (TAP) and
controller for boundary scan test.
PROPRIETARY and CONFIDENTIAL to PMC-Sierra Inc. and for its customers’ internal use
1

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]