TS925 データシートの表示（PDF） - STMicroelectronics
部品番号
コンポーネント説明
メーカー
TS925 Datasheet PDF : 17 Pages
| |||
TS925
1 Absolute Maximum Ratings
Absolute Maximum Ratings
Table 1. Key parameters and their absolute maximum ratings
Symbol
Parameter
Condition
Value
Unit
VCC
Vid
Vi
Tj
Rthja
Rthjc
ESD
Supply voltage (1)
Differential Input Voltage (2)
Input Voltage
Maximum Junction Temperature
Thermal Resistance Junction to
Ambient
SO-16
TSSOP16
DIP16
Thermal Resistance Junction to
Case
SO-16
TSSOP16
DIP16
HBM
Human Body Model(3)
Electro-Static Discharge
MM
Machine Model(4)
CDM
Charged Device Model
Output Short Circuit Duration
Latch-up Immunity
Soldering Temperature
10sec,
Pb-free package
14
±1
VDD-0.3 to VCC+0.3
150
95
95
63
30
25
33
V
V
V
°C
°C/W
°C/W
2
kV
200
V
1
kV
see note(5)
200
mA
260
°C
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1V,
the maximum input current must not exceed ±1mA. In this case (Vid > ±1V) an input serie resistor must be
added to limit input current.
3. Human body model, 100pF discharged through a 1.5kΩ resistor into pin of device.
4. Machine model ESD, a 200pF cap is charged to the specified voltage, then discharged directly into the IC with
no external series resistor (internal resistor < 5Ω), into pin to pin of device.
5. There is no short-circuit protection inside the device: short-circuits from the output to Vcc can cause excessive
heating. The maximum output current is approximately 80mA, independent of the magnitude of Vcc. Destructive
dissipation can result from simultaneous short-circuits on all amplifiers.
Table 2. Operating conditions
Symbol
Parameter
VCC
Vicm
Toper
Supply Voltage
Common Mode Input Voltage Range
Operating Free Air Temperature Range
Value
Unit
2.7 to 12
V
VDD -0.2 to VCC +0.2 V
-40 to +125
°C
3/17
Share Link: 