S3C9454B/F9454B
DEVELOPMENT TOOLS
Table 16-3. Using Single Header Pins as the Input Path for External Trigger Sources
Target Board Part
Comments
External
Triggers
Ch1
Ch2
Connector from
External Trigger
Sources of the
Application System
You can connect an external trigger source to one of the two
external trigger channels (CH1 or CH2) for the SK-1000/SMDS2+
breakpoint and trace functions.
ON
OFF
3EH.7 3EH.6 3EH.5 3EH.4 3EH.3 3EH.2 3FH.1 3FH.0
ON
OFF
Low
High
NOTE:
About EVA chip, smart option is determined by DIP switch
not software.
Figure 16-3. DIP Switch for Smart Option
16-5