6EP1352-1SH03 データシートの表示（PDF） - Siemens AG

部品番号

コンポーネント説明

メーカー

6EP1352-1SH03

Power supply LOGO!Power

Siemens AG 

Installation

4.2 Output-side connection

4.2

Output-side connection

The LOGO!Power power supplies provide an isolated (= non-grounded) SELV (Safety Extra

Low Voltage) output voltage at the output. The output of the power supplies is no-load,

overload, and short-circuit proof. If overload occurs, the electronic current limitation limits the

output current to a maximum value (refer to chapter Technical data, Output (Page 25)).

Figure 4-2 Connection of the output voltage

The output voltage is connected via the + and - terminals at the output of the power supply

(see Fig. 4-2). Make sure that the output cables are dimensioned correctly for the maximum

output current rms value and fused accordingly.

Note

When using LOGO!Power in conjunction with devices of the protection class I (with

protective conductor), a connection must be established between "-" and "PE" with at least

1.5 mm².

LOGO!Power

18

Operating Instructions, 02.2011, C98130-A7560-A999-1-7619

Share Link: