ATF1500A-10AI データシートの表示（PDF） - Atmel Corporation

部品番号

コンポーネント説明

メーカー

ATF1500A-10AI

High performance EPLD

Atmel Corporation 

Absolute Maximum Ratings*

Temperature Under Bias.................................. -40°C to +85°C

Storage Temperature ..................................... -65°C to +150°C

Voltage on Any Pin with

Respect to Ground .........................................-2.0V to +7.0V(1)

Voltage on Input Pins

with Respect to Ground

During Programming.....................................-2.0V to +14.0V(1)

Programming Voltage with

Respect to Ground .......................................-2.0V to +14.0V(1)

*NOTICE:

Stresses beyond those listed under “Absolute

Maximum Ratings” may cause permanent dam-

age to the device. This is a stress rating only and

functional operation of the device at these or any

other conditions beyond those indicated in the

operational sections of this specification is not

implied. Exposure to absolute maximum rating

conditions for extended periods may affect device

reliability.

Note:

1. Minimum voltage is -0.6V DC, which may under-

shoot to -2.0V for pulses of less than 20 ns. Max-

imum output pin voltage is VCC + 0.75V DC,

which may overshoot to 5.25V for pulses of less

than 20 ns.

DC and AC Operating Conditions

Operating Temperature (ambient)

VCC Power Supply

Commercial

0°C - 70°C

5V ± 5%

Industrial

-40°C - 85°C

5V ± 10%

DC Characteristics

Symbol Parameter

Condition

Min

Typ

Max

Units

IIL

Input or I/O

Low Leakage Current

0 ≤ VIN ≤ VIL (Max)

-10

µA

IIH

Input or I/O

High Leakage Current

VIH, Min ≤ VIN ≤ VCC

10

µA

ICC1(1)

Power Supply Current,

Standby

VCC = Max,

VIN = 0, VCC

ATF1500A

ATF1500AL

Com.

Ind.

Com.

Ind.

70

mA

100

mA

3

mA

5

mA

ICC2

Power Supply Current,

Pin-Controlled Power

Down Mode

VCC = Max,

VIN = 0, VCC

2

10

mA

Output Short Circuit

IOS

Current

VOUT = 0.5V

-130

mA

VIL

VIH

VOL

VOH

Note:

Input Low Voltage

VCC, Min < VCC

< VCC, Max

-0.5

0.8

V

Input High Voltage

2.0

VCC + 1

V

Output Low Voltage

VCC = Min

IOL = 12 mA

0.45

V

IOH = -4 mA

2.4

V

Output High Voltage

VCC = Min

IOH = -0.2 mA

VCC - 0.2

V

1. All ICC parameters measured with outputs open, and a 16-bit loadable, up/down counter programmed into each region.

6

ATF1500A(L)

Share Link: