MAX5104 データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX5104 Datasheet PDF : 12 Pages
| |||
Low-Power, Dual, Voltage-Output, 12-Bit DAC
with Serial Interface
ABSOLUTE MAXIMUM RATINGS
VDD to AGND............................................................-0.3V to +6V
VDD to DGND ...........................................................-0.3V to +6V
AGND to DGND ..................................................................±0.3V
OSA, OSB to AGND.......................(VAGND - 4V) to (VDD + 0.3V)
REF_, OUT_ to AGND.................................-0.3V to (VDD + 0.3V)
Digital Inputs (SCLK, DIN, CS,
CL, PDL) to DGND ...........................................(-0.3V to +6V)
Digital Outputs (DOUT, UPO) to DGND .....-0.3V to (VDD + 0.3V)
Maximum Current into Any Pin .........................................±20mA
Continuous Power Dissipation (TA = +70°C)
16-Pin QSOP (derate 8.30mW/°C above +70°C).......667mW
Operating Temperature Ranges
MAX5104CEE ...................................................0°C to +70°C
MAX5104EEE.................................................-40C° to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V ±10%, VREFA = VREFB = +2.048V, RL = 10kΩ, CL = 100pF, TA = TMIN to TMAX, unless otherwise noted. Typical values
are at TA = +25°C (OS_ connected to AGND for a gain of +2V/V).)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
STATIC PERFORMANCE
Resolution
Integral Nonlinearity
Differential Nonlinearity
Offset Error
Offset Tempco
Gain Error
Gain-Error Tempco
INL
DNL
VOS
TCVOS
(Note 1)
Guaranteed monotonic
Code = 10
Normalized to 2.048V
Normalized to 2.048V
12
Bits
±4
LSB
±1
LSB
±10 mV
4
ppm/°C
-0.2
±8
LSB
4
ppm/°C
VDD Power-Supply
Rejection Ratio
PSRR 4.5V ≤ VDD ≤ 5.5V
20
600 µV/V
REFERENCE INPUT
Reference Input Range
REF
Reference Input Resistance
RREF
MULTIPLYING-MODE PERFORMANCE
Minimum with code 1554 hex
0
VDD - 1.4 V
14
20
kΩ
Reference 3dB Bandwidth
Input code = 1FFE hex,
VREF_ = 0.67Vp-p at 2.5VDC
300
kHz
Reference Feedthrough
Input code = 0000 hex,
VREF_ = (VDD - 1.4Vp-p), f = 1kHz
-82
dB
Signal-to-Noise plus
Distortion Ratio
SINAD
Input code = 1FFE hex,
VREF_ = 1Vp-p at 1.25VDC, f = 25kHz
75
dB
DIGITAL INPUTS
Input High Voltage
Input Low Voltage
Input Hysteresis
Input Leakage Current
Input Capacitance
VIH
VIL
VHYS
IIN
CIN
CL, PDL, CS, DIN, SCLK
CL, PDL, CS, DIN, SCLK
VIN = 0 to VDD
3
V
0.8
V
200
mV
0.001 ±1
µA
8
pF
2 _______________________________________________________________________________________
Share Link: 