MT2060 データシートの表示（PDF） - Microtune,Inc
部品番号
コンポーネント説明
メーカー
MT2060 Datasheet PDF : 2 Pages
| |||
MT2060 SINGLE CHIP BROADBAND TUNER
PRODUCT BRIEF
RECOMMENDED OPERATING CONDITIONS
PARAMETER
MIN
TYP
MAX
UNIT
Input frequency range
48
First intermediate center frequency
860
1220
MHz
MHz
Second intermediate center
frequency (programmable)
Supply voltage
30
60
MHz
3.15
3.3
3.45
V
Supply voltage ripple
Operating junction temperature
15
mV
100
°C
VGA output load impedance
200
Ω
Serial control clock
400
kHz
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Supply voltage
Storage temperature range
Lead temperature (soldering 4
seconds)
Input voltage
MIN
MAX
UNIT
3.6
V
-40
+150
°C
+245
°C
-0.3
VCC +0.3
V
TUNER ELECTRICAL CHARACTERISTICS
PARAMETER
MIN
TYP
MAX
Power Supply
Active current
300
Shut-down current
14
RF Signal Path
Input frequency range
48
860
Return loss
8
Noise figure at max gain
8
Terminal voltage gain
42
RF AGC range
30
Gain variation at any frequency
-3
+3
Image rejection
60
LO phase noise (10kHz)
-86
LO phase noise (100kHz)
-108
LO step size
50
IF VGA
Frequency range
30
60
Output voltage
2.0
Terminal voltage gain
10
52
Noise figure at max gain
10
Serial Interface
Serial clock frequency
400
UNIT
mA
mA
MHz
dB
dB
dB
dB
dB
dBc
dBc/Hz
dBc/Hz
kHz
MHz
Vp-p
dB
dB
kHz
NC 1
NC 2
RFagc 3
PRES 4
NC 5
LO1Avcc 6
LO1t2 7
LO1t1 8
LO1reg 9
LO1Dvcc 10
LO1lpf 11
SERen 12
Exposed die attach paddle
on package bottom
MT2060 Pin Diagram
36 FGAop
35 FGAon
34 GPO2
33 LO2Avcc
32 LO2reg
31 LO2t
30 LO2lpf
RF INPUT
29 LO2Dvcc
28 VGAvcc
27 VGAip
26 VGAin
25 IFagc
MIX 1
L01
PLL
MIX 2 FGA
L02
PLL
VGA
SRO
SERIAL CONTROL
INTERFACE
IF OUTPUT
SERIAL DATA
CLOCK
MT2060 Block Diagram
Microtune, Inc., 2201 Tenth Street, Plano, TX 75074, USA
Tel: +1-972-673-1600, Fax: +1-972-673-1602, E-mail: sales@microtune.com, Web site: www.microtune.com
For a detailed list of office locations, sales offices, and sales representatives, visit our Web site at www.microtune.com
The information in this document is believed to be accurate and reliable. Microtune assumes no responsibility for any consequences arising from the use of this information, nor from any infringement of patents or
the rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or other rights of Microtune. The information in this publication replaces and supersedes all
information previously supplied, and is subject to change without notice. The customer is responsible for assuring that proper design and operating safeguards are observed to minimize inherent and procedural
hazards. Microtune assumes no responsibility for applications assistance or customer product design.
The devices described in this document are not authorized for use in medical, life-support equipment, or any other application involving a potential risk of severe property or environmental damage, personal injury,
or death without prior express written approval of Microtune. Any such use is understood to be entirely at the user’s risk.
Microtune is a registered trademark of Microtune, Inc. MicroTuner, MicroStreamer, VideoCaster, DataCaster, ClearTune, and the Microtune logo are trademarks of Microtune, Inc. All other trademarks belong to
their respective companies.
Microtune’s products are protected by one or more of the following U.S. patents: 5,625,325; 5,648,744; 5,717,730; 5,737,035; 5,739,730; 5,805,988; 5,847,612; 6,100,761; 6,104,242; 6,163,684; 6,169,569;
6,172,378; 6,177,964; 6,211,745; 6,218,899; 6,268,778; 6,310,387; 6,323,736; 6,355,537; 6,429,502; 6,462,327; 6,535,068; 6,580,313; 6,608,522; 6,631,257; 6,714,776; 6,725,463; 6,744,308; 6,771,124;
6,784,945; 6,804,099; 6,888,406; 6,891,435; 6,906,594; 6,909,886; 6,919,774; 6,920,182; 6,922,556; 6,963,478; 6,973,288; 6,993,310; 7,035,614; 7,078,960; 7,079,195; 7,164,899; 7,171,176; D469,742 and
additional patents pending or filed.
Entire contents Copyright © 1996 - 2007 Microtune, Inc.
013007
MT2060 PB-00063 — Rev 1.4
February, 2007
Share Link: 