FL216KIF データシートの表示（PDF） - Spansion Inc.
部品番号
コンポーネント説明
メーカー
FL216KIF Datasheet PDF : 37 Pages
| |||
S25FL216K
16-Mbit 3.0V Serial Flash Memory with Uniform 4 kB Sectors
Data Sheet (Preliminary)
Distinctive Features
Single power supply operation
– Full voltage range: 2.7 to 3.6V
16-Mbit Serial Flash
– 16-Mbit/2048 kbyte/9192 pages
– 256 bytes per programmable page
– Uniform 4-kbyte Sectors/64-kbyte Blocks
Standard and Dual
– Standard SPI: SCK, CS#, SI, SO, WP#, HOLD#
– Dual SPI: SCK, CS#, SI/IO0, SO, WP#, HOLD#
– Fast Read Dual Output instruction
– Auto-increment Read capability
High Performance
– FAST READ (Serial): 65 MHz clock rate
– DUAL OUTPUT READ: 65 MHz clock rate
Low Power Consumption
– 12 mA typical active current
– 15 µA typical standby current
Flexible Architecture with 4 kB Sectors
– Sector Erase (4 kB)
– Block Erase (64 kB)
– Page Program up to 256 bytes
– 100k erase/program cycles typical
– 20-year data retention typical
Software and Hardware Write Protection
– Write Protect all or portion of memory via software
– Enable/Disable protection with WP# pin
High Performance Program/Erase Speed
– Page program time: 1.6 ms typical
– Sector erase time (4 kB): 45 ms typical
– Block erase time (64 kB): 450 ms typical
– Chip erase time: 12 seconds typical
Package Options
– 8-pin SOIC 150/208-mil
– All Pb-free packages are RoHS compliant
General Description
The S25FL216K device is a 16-Mbit, 2048-kbyte Serial Flash memory, with advanced write protection mechanisms. The
S25FL216K supports the standard Serial Peripheral Interface (SPI), and a high performance Dual output using SPI pins: Serial
Clock, Chip Select, Serial SI/IO0, SO, WP#, and HOLD#. SPI clock frequencies of up to 65 MHz are supported.
The S25FL216K array is organized into 8,192 programmable pages of 256 bytes each. Up to 256 bytes can be programmed at
a time. Pages can be erased in groups of 16 (4-kB Sector Erase), groups of 256 (64-kB Block Erase) or the entire chip (Chip
Erase). The S25FL216K has 512 erasable sectors and 32 erasable blocks. The small 4 kB sectors allow for greater flexibility in
applications that require data and parameter storage.
A Hold pin, Write Protect Pin and programmable write protection provide further control flexibility. Additionally, the S25FL216K
device supports JEDEC standard manufacturer and device identification.
Publication Number S25FL216K_00
Revision 07
Issue Date August 9, 2012
This document states the current technical specifications regarding the Spansion product(s) described herein. The Preliminary status of this document indicates that product qual-
ification has been completed, and that initial production has begun. Due to the phases of the manufacturing process that require maintaining efficiency and quality, this document
may be revised by subsequent versions or modifications due to changes in technical specifications.
Share Link: 