28F002BL-B150 データシートの表示（PDF） - Intel

部品番号

コンポーネント説明

メーカー

28F002BL-B150

2-MBIT (128K x 16, 256K x 8) LOW-POWER BOOT BLOCK FLASH MEMORY FAMILY

Intel 

28F200BL-T B 28F002BL-T B

2 1 28F200BL Memory Organization

2 1 1 BLOCKlNG

The 28F200BL uses a blocked array architecture to

provide independent erasure of memory blocks A

block is erased independently of other blocks in the

array when an address is given within the block ad-

dress range and the Erase Setup and Erase Confirm

commands are written to the CUI The 28F200BL is

a random read write memory only erasure is per-

formed by block

2 1 1 1 Boot Block Operation and Data

Protection

The 16-Kbyte boot block provides a lock feature for

secure code storage The intent of the boot block is

to provide a secure storage area for the kernel code

that is required to boot a system in the event of pow-

er failure or other disruption during code update

This lock feature ensures absolute data integrity by

preventing the boot block from being written or

erased when RP is not at 12V The boot block can

be erased and written when RP is held at 12V for

the duration of the erase or program operation This

allows customers to change the boot code when

necessary while providing security when needed

See the Block Memory Map section for address lo-

cations of the boot block for the 28F200BL-T and

28F200BL-B

2 1 1 3 Main Block Operation

Two main blocks of memory exist on the 28F200BL

(1 x 128-Kbyte block and 1 x 96-Kbyte blocks) See

the following section on Block Memory Map for the

address location of these blocks for the 28F200BL-T

and 28F200BL-B products

2 1 2 BLOCK MEMORY MAP

Two versions of the 28F200BL product exist to sup-

port two different memory maps of the array blocks

in order to accommodate different micropro- cessor

protocols for boot code location The 28F200BL-T

memory map is inverted from the 28F200BL-B mem-

ory map

2 1 2 1 28F200BL-B Memory Map

The 28F200BL-B device has the 16-Kbyte boot

block located from 00000H to 01FFFH to accom-

modate those microprocessors that boot from the

bottom of the address map at 00000H In the

28F200BL-B the first 8-Kbyte parameter block re-

sides in memory space from 02000H to 02FFFH

The second 8-Kbyte parameter block resides in

memory space from 03000H to 03FFFH The

96-Kbyte main block resides in memory space from

04000H to 0FFFFH The 128-Kbyte main block re-

sides in memory space from 10000H to 1FFFFH

(word locations) See Figure 7

2 1 1 2 Parameter Block Operation

The 28F200BL has 2 parameter blocks (8 Kbytes

each) The parameter blocks are intended to pro-

vide storage for frequently updated system parame-

ters and configuration or diagnostic information The

parameter blocks can also be used to store addition-

al boot or main code The parameter blocks howev-

er do not have the hardware write protection feature

that the boot block has The parameter blocks pro-

vide for more efficient memory utilization when deal-

ing with parameter changes versus regularly blocked

devices See the Block Memory Map section for ad-

dress locations of the parameter blocks for the

28F200BL-T and 28F200BL-B

(Word Addresses)

1FFFFH

128-Kbyte MAIN BLOCK

10000H

0FFFFH

04000H

03FFFH

03000H

02FFFH

02000H

01FFFH

00000H

96-Kbyte MAIN BLOCK

8-Kbyte PARAMETER BLOCK

8-Kbyte PARAMETER BLOCK

16-Kbyte BOOT BLOCK

Figure 7 28F200BL-B Memory Map

12

Share Link: