SOLARLOK Photovoltaic Interconnection System
Assembly and Installation Guidelines (continued)
When assembling the connectors, the following sequence must be followed:
Catalog 889753-3
Revised 9-2009
1 Stripping the Wire (please refer to application specification # 114-74013).
8.0 mm
Fig. 1
2 Insert the stripped wire into the wire crimp barrel until it stops.
While holding the wire in place, squeeze tool handles together until ratchet releases.
Fig. 2
3 Push contact with cable into the connector housing (incl. seal/pinch ring combination and backshell)
until you hear the contact is locked into position.
Fig. 3
Click
4 Tighten backshell nut to 1.5 Nm.
Fig. 4
30
All dimensions are in millimeters unless otherwise specified. All specifications subject to change.
Consult Tyco Electronics for latest specifications.