EVAL-AD5930EBZ(RevB) データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

EVAL-AD5930EBZ
(Rev.:RevB)

Programmable Frequency Sweep and Output Burst Waveform Generator

Analog Devices 

AD5930

Data Sheet

Pin No.

18

19

20

Mnemonic

AGND

IOUT

IOUTB

Description

Ground for all Analog Circuitry.

Current Output. This is a high impedance current source output. A load resistor of nominally 200 Ω should be

connected between IOUT and AGND. A 20 pF capacitor to AGND is also recommended to act as a low-pass filter

and to reduce clock feedthrough. In conjunction with IOUTB, a differential signal is available.

Current Output. IOUTB is the compliment of IOUT. This pin should preferably be tied through an external load

resistor of 200 Ω to AGND, but can be tied directly to AGND. A 20 pF capacitor to AGND is also recommended as a

low-pass filter to reduce clock feedthrough. In conjunction with IOUT, a differential signal is available.

Rev.B | Page 10 of 28

Share Link: