ADCMP567 データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

ADCMP567

Dual Ultrafast Voltage Comparator

Analog Devices 

Data Sheet

Pin No.

24

25

26

Mnemonic

VEE

VDD

QA

27

QA

28

VDD

29

NC

30

LEA

31

LEA

32

GND

EPAD

ADCMP567

Function

Negative Supply Terminal.

Logic Supply Terminal.

One of two complementary outputs for Channel A. QA will be at logic high if the analog voltage at the

noninverting input is greater than the analog voltage at the inverting input (provided the comparator is

in the compare mode). See the LEA description (Pin 30) for more information.

One of two complementary outputs for Channel A. QA will be at logic low if the analog voltage at the

noninverting input is greater than the analog voltage at the inverting input (provided the comparator is

in the compare mode). See the LEA description (Pin 30) for more information.

Logic Supply Terminal.

No Connect. Do not connect to this pin.

One of two complementary inputs for Channel A Latch Enable. In the compare mode (logic high), the

output will track changes at the input of the comparator. In the latch mode (logic low), the output will

reflect the input state just prior to the comparator’s being placed in the latch mode. LEA must be driven

in conjunction with LEA.

One of two complementary inputs for Channel A Latch Enable. In the compare mode (logic low), the

output will track changes at the input of the comparator. In the latch mode (logic high), the output will

reflect the input state just prior to the comparator’s being placed in the latch mode. LEA must be driven

in conjunction with LEA.

Analog Ground.

Exposed Pad. The recommended connection for the exposed pad is ground.

Rev. A | Page 7 of 14

Share Link: