ADN2870 データシートの表示（PDF） - Analog Devices
部品番号
コンポーネント説明
メーカー
ADN2870 Datasheet PDF : 20 Pages
| |||
ADN2870
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
VCC to GND
IMODN, IMODP
PAVCAP
ERCAP
PAVSET
PAVREF
ERREF
IBIAS
IBMON
IMMON
ALS
CCBIAS
RPAV
ERSET
FAIL
DATAP, DATAN
(single-ended differential)
Rating
4. 2 V
–0.3 V to +4.8 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
–0.3 V to +3.9 V
1.5 V
TEMPERATURE SPECIFICATIONS
Operating Temperature Range
Industrial
−40°C to +85°C
Storage Temperature Range
–65°C to +150°C
Junction Temperature (TJ max)
150°C
LFCSP Package
Power Dissipation1
(TJ max – TA)/θJA W
θJA Thermal Impedance2
30°C/W
θJCThermal Impedance
29.5°C/W
Lead Temperature (Soldering 10 s)
300°C
___________________
1 Power consumption equations are provided in the Power Consumption
section.
2 θJA is defined when part is soldered on a 4-layer board.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those listed in the operational sections
of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 6 of 20
Share Link: 