ADP2386(RevA) データシートの表示（PDF） - Analog Devices
部品番号
コンポーネント説明
メーカー
ADP2386 Datasheet PDF : 24 Pages
| |||
Data Sheet
20 V, 6 A, Synchronous Step-Down
DC-to-DC Regulator
ADP2386
FEATURES
Input voltage: 4.5 V to 20 V
Integrated MOSFET: 44 mΩ/11 mΩ
Reference voltage: 0.6 V ± 1%
Continuous output current: 6 A
Programmable switching frequency: 200 kHz to 1.4 MHz
Synchronizes to external clock: 200 kHz to 1.4 MHz
180° out of phase clock synchronization
Precision enable and power good
External compensation
Internal soft start with external adjustable option
Startup into a precharged output
Supported by ADIsimPower design tool
APPLICATIONS
Communications infrastructure
Networking and servers
Industrial and instrumentation
Healthcare and medical
Intermediate power rail conversion
DC-to-dc point-of-load applications
GENERAL DESCRIPTION
The ADP2386 is a synchronous step-down, dc-to-dc regulator with
an integrated 44 mΩ, high-side power MOSFET and an 11 mΩ,
synchronous rectifier MOSFET to provide a high efficiency
solution in a compact 4 mm × 4 mm LFCSP package. This device
uses a peak current mode, constant frequency pulse-width
modulation (PWM) control scheme for excellent stability and
transient response. The switching frequency of the ADP2386
can be programmed from 200 kHz to 1.4 MHz. To minimize
system noise, the synchronization function allows the switching
frequency to be synchronized to an external clock.
The ADP2386 requires minimal external components and
operates from an input voltage of 4.5 V to 20 V. The output
voltage can be adjusted from 0.6 V to 90% of the input voltage
TYPICAL APPLICATIONS CIRCUIT
VIN
CIN
RT
CVREG
ADP2386
PVIN
BST
EN
SW
PGOOD
SYNC
RT
FB
COMP
VREG
SS
GND PGND
CBST L
RTOP
RC
CSS
RBOT
CC
VOUT
COUT
Figure 1.
100
95
90
85
80
75
70
65
60
VOUT = 5.0V
55
VOUT = 3.3V
VOUT = 1.2V
50
0
1
2
3
4
5
6
OUTPUT CURRENT (A)
Figure 2. Efficiency vs. Output Current, VIN = 12 V, fSW = 300 kHz
and delivers up to 6 A of continuous current. Each IC draws less
than 110 μA current from the input source when it is disabled.
This regulator targets high performance applications that require
high efficiency and design flexibility. External compensation and an
adjustable soft start function provide design flexibility. The power-
good output and precision enable input provide simple and reliable
power sequencing.
Other key features include undervoltage lockout (UVLO),
overvoltage protection (OVP), overcurrent protection (OCP),
short-circuit protection (SCP), and thermal shutdown (TSD).
The ADP2386 operates over the −40°C to +125°C junction
temperature range and is available in a 24-lead, 4 mm × 4 mm
LFCSP package.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2012–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
Share Link: 