ADT7476AARQZ-REEL データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

ADT7476AARQZ-REEL

dBCool™ Remote Thermal Controller and Voltage Monitor

Analog Devices 

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

Positive Supply Voltage (VCC)

Maximum Voltage on +12 VIN Pin

Maximum Voltage on +5 VIN Pin

Maximum Voltage on All Open-Drain Outputs

Max Voltage on TACH/PWM Pins

Voltage on Remaining Input or Output Pins

Input Current at Any Pin

Package Input Current

3.6 V

16 V

6.25 V

3.6 V

+5.5 V

−0.3 V to +4.2 V

±5 mA

±20 mA

Maximum Junction Temperature (TJMAX)

Storage Temperature Range

Lead Temperature, Soldering

IR Reflow Peak Temperature

Pb-Free Peak Temperature

Lead Temperature (Soldering, 10 sec)

ESD Rating

150°C

−65°C to +150°C

220°C

260°C

300°C

1500 V

ADT7476A

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

THERMAL CHARACTERISTICS

JA is specified for the worst-case conditions, that is, a device

soldered in a circuit board for surface-mount packages.

Table 3. Thermal Resistance

Package Type

θJA

24-lead QSOP

122

θJC

31.25

Unit

°C/W

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. 0 | Page 5 of 72

Share Link: