ADT7473ARQZ データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

ADT7473ARQZ

dBCool® Remote Thermal Monitor and Fan Controller

Analog Devices 

ADT7473

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

Positive Supply Voltage (VCC)

3.6 V

Voltage on Any Input or Output Pin

−0.3 V to +3.6 V

Input Current at Any Pin

±5 mA

Package Input Current

±20 mA

Maximum Junction Temperature (TJ max)

Storage Temperature Range

150°C

−65°C to +150°C

Lead Temperature, Soldering

IR Reflow Peak Temperature

260°C

Lead Temperature (Soldering, 10 sec)

300°C

ESD Rating

1500 V

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

THERMAL RESISTANCE

θJA is specified for the worst-case conditions, that is, a device

soldered in a circuit board for surface-mount packages.

Table 3. Thermal Resistance

Package Type

θJA

θJC

16-Lead QSOP

150

39

Unit

°C/W

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. A | Page 6 of 76

Share Link: