M24128-BW M24128-BR M24128-BF M24128-DF
Instructions
5.1.1
Byte Write
After the device select code and the address bytes, the bus master sends one data byte. If
the addressed location is Write-protected, by Write Control (WC) being driven high, the
device replies with NoAck, and the location is not modified. If, instead, the addressed
location is not Write-protected, the device replies with Ack. The bus master terminates the
transfer by generating a Stop condition, as shown in Figure 8.
Figure 8. Write mode sequences with WC = 0 (data write enabled)
DocID16892 Rev 30
15/46
45