AM50-0003 データシートの表示（PDF） - M/A-COM Technology Solutions, Inc.

部品番号

コンポーネント説明

メーカー

AM50-0003

High Dynamic Range Low Noise Amplifier 800 - 1000 MHz

M/A-COM Technology Solutions, Inc. 

AM50-0003

High Dynamic Range Low Noise Amplifier

800 - 1000 MHz

Recommended PCB Configuration

Cross Section View

Rev. V5

The PCB dielectric between RF traces and RF ground

layers should be chosen to reduce RF discontinuities

between 50 Ω lines and package pins. M/A-COM rec-

ommends an FR-4 dielectric thickness of 0.008” (0.20

mm) yielding a 50 Ω line width of 0.015” (0.38 mm).

The recommended RF metalization thickness is 1

ounce copper.

Designer’s Kit AM50-0003SMB

The AM50-0003SMB Designer’s Kit allows for immediate evaluation of M/A-COM’s AM50-0003. The Designer’s

Kit includes an evaluation board with mounted AM50-0003 and five loose AM50-0003’s. The evaluation board

consists of the recommended external surface mount circuitry, RF connectors, and a DC multi-pin connector, all

mounted to a multi-layer FR-4 PCB. The AM50-0003SMB evaluation PCB is illustrated below with all functional

ports labeled.

AM50-0003 Evaluation Board

Evaluation PCB & RF Connector Losses

Port Reference

LNA Input

Approximate RF Loss

0.1 dB @ 900 MHz

LNA Output

0.1 dB @ 900 MHz

The DC connector on the Designer’s Kit PCB allows convenient

DC line access. This is accomplished by one or more of the

following methods:

A.) A mating female multi-pin connector

(Newark Electronics Stock # 46F-4658, not included).

B.) Wires soldered to the necessary pins (not included).

C.) Clip leads (not included).

3

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

Commitment to produce in volume is not guaranteed.

changes to the product(s) or information contained herein without notice.

Share Link: