APW7066
Pin Description (Cont.)
PIN
NO.
TSSOP-24P DFN5x5-32
NAME
FUNCTION
22
24
UGATE1 These pins provide the gate driver for the upper MOSFETs of VOUT1 and VOUT2.
These pins provide the bootstrap voltage to the gate driver for driving the upper
23
25
BOOT1 MOSFETs. It can be connected to a power voltage directly, but the difference voltage
between the BOOT and VIN must be high enough to drive the upper MOSFETs.
Power supply input pin. Connect a nominal 5V power supply to this pin for the control
24
28
VCC
circuit, or connect a resistor (nominally 300Ω) to VCC12 for a shunt regulator function
(typical 5.8V). It is recommended that a decoupling capacitor (1 to 10µF) is
connected to the GND for noise decoupling.
-
2,9,15,17,26,27 NC
Copyright © ANPEC Electronics Corp.
17
Rev. A.8 - Aug., 2009
www.anpec.com.tw