ATMEGA329/V_06 データシートの表示（PDF） - Atmel Corporation

部品番号

コンポーネント説明

メーカー

ATMEGA329/V_06

8-bit Microcontroller with In-System Programmable Flash

Atmel Corporation 

Errata

ATmega329 rev. C

ATmega329 rev. B

ATmega329 rev. A

ATmega329/3290/649/6490

• Interrupts may be lost when writing the timer registers in the asynchronous timer

1. Interrupts may be lost when writing the timer registers in the asynchronous

timer

If one of the timer registers which is synchronized to the asynchronous timer2 clock

is written in the cycle before a overflow interrupt occurs, the interrupt may be lost.

Problem Fix/Wortkaround

Always check that the Timer2 Timer/Counter register, TCNT2, does not have the

value 0xFF before writing the Timer2 Control Register, TCCR2, or Output Compare

Register, OCR2.

Not sampled.

• LCD contrast voltage too high

• Interrupts may be lost when writing the timer registers in the asynchronous timer

1. LCD contrast voltage too high

When the LCD is active and using low power waveform, the LCD contrast voltage

can be too high. This occurs when VCC is higher than VLCD, and when using low

LCD drivetime.

Problem Fix/Workaround

There are several possible workarounds:

- Use normal waveform instead of low power waveform

- Use drivetime of 375 µs or longer

2. Interrupts may be lost when writing the timer registers in the asynchronous

timer

If one of the timer registers which is synchronized to the asynchronous timer2 clock

is written in the cycle before a overflow interrupt occurs, the interrupt may be lost.

Problem Fix/Wortkaround

Always check that the Timer2 Timer/Counter register, TCNT2, does not have the

value 0xFF before writing the Timer2 Control Register, TCCR2, or Output Compare

Register, OCR2.

23

2552HS–AVR–11/06

Share Link: