MC145190F データシートの表示（PDF） - Motorola => Freescale

部品番号

コンポーネント説明

メーカー

MC145190F

1.1 GHz frequency synthsizer

Motorola => Freescale 

PHASE–LOCKED LOOP—LOW PASS FILTER DESIGN

(A)

PDout

VCO

R

C

ωn =

Kφ KVCO

NC

R

ζ= 2

Kφ KVCOC

N

=

ωnRC

2

1 + sRC

Z(s) = sC

NOTE:

For (A), using Kφ in amps per radian with the filter’s impedance transfer function, Z(s), maintains units of volts per radian for the

detector/ filter combination. Additional sideband filtering can be accomplished by adding a capacitor C′ across R. The corner ωc = 1/RC′

should be chosen such that ωn is not significantly affected.

(B)

φR

φV

R2

R1

C

–

A

VCO

+

R1

R2

C

ωn =

Kφ KVCO

NCR1

ωnR2C

ζ=

2

ASSUMING GAIN A IS VERY LARGE, THEN:

F(s) = R2sC + 1

R1sC

NOTE:

For (B), R1 is frequently split into two series resistors; each resistor is equal to R1 divided by 2. A capacitor CC is then placed from

the midpoint to ground to further filter the error pulses. The value of CC should be such that the corner frequency of this network does

not significantly affect ωn.

* The φR and φV outputs are fed to an external combiner/loop filter. The φR and φV outputs swing rail–to–rail. Therefore, the user should be careful

not to exceed the common mode input range of the op amp used in the combiner/loop filter.

DEFINITIONS:

N = Total Division Ratio in Feedback Loop

Kφ (Phase Detector Gain) = IPDout / 2π amps per radian for PDout

Kφ (Phase Detector Gain) = VPD / 2π volts per radian for φV and φR

KVCO

(VCO

Transfer

Function)

=

2π∆fVCO

∆VVCO

radians per volt

For a nominal design starting point, the user might consider a damping factor ζ≈0.7 and a natural loop frequency ωn ≈ (2πfR/50) where fR is

the frequency at the phase detector input. Larger ωn values result in faster loop lock times and, for similar sideband filtering, higher fR–related

VCO sidebands.

Either loop filter (A) or (B) is frequently followed by additional sideband filtering to further attenuate fR–related VCO sidebands. This additional

filtering may be active or passive.

RECOMMENDED READING:

Gardner, Floyd M., Phaselock Techniques (second edition). New York, Wiley–Interscience, 1979.

Manassewitsch, Vadim, Frequency Synthesizers: Theory and Design (second edition). New York, Wiley–Interscience, 1980.

Blanchard, Alain, Phase–Locked Loops: Application to Coherent Receiver Design. New York, Wiley–Interscience, 1976.

Egan, William F., Frequency Synthesis by Phase Lock. New York, Wiley–Interscience, 1981.

Rohde, Ulrich L., Digital PLL Frequency Synthesizers Theory and Design. Englewood Cliffs, NJ, Prentice–Hall, 1983.

Berlin, Howard M., Design of Phase–Locked Loop Circuits, with Experiments. Indianapolis, Howard W. Sams and Co., 1978.

Kinley, Harold, The PLL Synthesizer Cookbook. Blue Ridge Summit, PA, Tab Books, 1980.

Seidman, Arthur H., Integrated Circuits Applications Handbook, Chapter 17, pp. 538–586. New York, John Wiley & Sons.

Fadrhons, Jan, “Design and Analyze PLLs on a Programmable Calculator,” EDN. March 5, 1980.

AN535, Phase–Locked Loop Design Fundamentals, Motorola Semiconductor Products, Inc., 1970.

AR254, Phase–Locked Loop Design Articles, Motorola Semiconductor Products, Inc., Reprinted with permission from

Electronic Design, 1987.

AN1253/D, An Improved PLL Design Method Without ωn and ζ, Motorola Semiconductor Products, Inc., 1995.

MOTOROLA

MC145190•MC145191

19

Share Link: