COM20020 データシートの表示（PDF） - SMSC -> Microchip

部品番号

コンポーネント説明

メーカー

COM20020

COM20020 3.3V ULANC Universal Local Area Network Controller with 2K x 8 On-Board RAM

SMSC -> Microchip 

The Differential Driver Configuration cannot

communicate directly with nodes utilizing the

Traditional Hybrid Configuration. Like the

Backplane Configuration, the Differential Driver

Configuration does not isolate the node from the

media.

The Differential Driver interface includes a RS485

Driver/Receiver to transfer the data between the

cable and the COM20020. The nPULSE1 signal

transmits the data, provided the Transmit Enable

signal is active. The nPULSE1 signal issues a

200nS (at 2.5Mbps) negative pulse to transmit a

logic "1". Lack of pulse indicates a logic "0". The

RXIN signal receives the data, the transmitter

portion of the COM20020 is disabled during reset

and the nPULSE1, nPULSE2 and nTXEN pins are

inactive.

Programmable TXEN Polarity

To accommodate transceivers with active high

ENABLE pins, the COM20020 contains a

programmable TXEN output. To program the

TXEN pin for an active high pulse, the nPULSE2

pin should be connected to ground. To retain the

normal active low polarity, nPULSE2 should be

left open. The polarity determination is made at

power on reset and is valid only for Backplane

Mode operation. The nPULSE2 pin should

remain grounded at all times if an active high

polarity is desired.

21

Share Link: