CY7C1021D
Capacitance
Parameter [4]
Description
CIN
COUT
Input capacitance
Output capacitance
Test Conditions
TA = 25C, f = 1 MHz, VCC = 5.0 V
Max
Unit
8
pF
8
pF
Thermal Resistance
Parameter [4]
Description
JA
Thermal resistance
(junction to ambient)
JC
Thermal resistance
(junction to case)
Test Conditions
Still Air, soldered on a 3 × 4.5 inch, four-layer
printed circuit board
44-pin SOJ
59.52
36.75
44-pin TSOP II Unit
53.91
C/W
21.24
C/W
AC Test Loads and Waveforms
Figure 2. AC Test Loads and Waveforms [5]
OUTPUT
Z = 50
* CAPACITIVE LOAD CONSISTS
OF ALL COMPONENTS OF THE
TEST ENVIRONMENT
50
1.5 V
(a)
30 pF*
3.0 V
GND
ALL INPUT PULSES
90%
90%
10%
10%
Rise Time: 3 ns
(b)
Fall Time: 3 ns
High-Z characteristics:
R1 480
5V
OUTPUT
INCLUDING
JIG AND
SCOPE
5 pF
(c)
R2
255
Notes
4. Tested initially and after any design or process changes that may affect these parameters.
5. AC characteristics (except High Z) are tested using the load conditions shown in Figure 2 (a). High Z characteristics are tested for all speeds using the test load
shown in Figure 2 (c).
Document Number: 38-05462 Rev. *M
Page 5 of 17