RP03-1205DB データシートの表示（PDF） - RECOM Electronic GmbH

部品番号

コンポーネント説明

メーカー

RP03-1205DB

3 Watt DIP24 & SMD, Single, Dual & Dual Isolated Output

RECOM Electronic GmbH 

POWERLINE

DC/DC-Converter

RP03-S_DB

(DB/DS) Series

Specifications (typical at nominal input and 25°C unless otherwise noted)

Isolation Voltage

Isolation Resistance

Isolation Capacitance

Operating Frequency

Approved to Safety Standards

Operating Temperature Range

Maximum Case Temperature

Storage Temperature Range

Thermal Impedance

Thermal Shock

Vibration

Relative Humidity

Case Material

Base Material

Potting Material

Conducted Emissions

Radiated Emissions

ESD

Radiated Immunity

Fast Transient

Surge

Conducted Immunity

Weight

Dimensions

MTBF (see note 2)

In to out

I/O to case

Output to Output

Standard

M1 (see note 3)

Natural convection

EN55022

EN55022

EN61000-4-2

EN61000-4-3

EN61000-4-4

EN61000-4-5

EN61000-4-6

DIP

SMD

DIP

SMD

DIP at SMD type

/DS type

500VDC min.

500VDC min.

500VDC min.

109 Ω min.

300pF max.

300kHz typ.

UL 1950, EN60950

-25°C to +85°C (with derating)

-40°C to +85°C (non-derating)

+100°C

-55°C to +105°C

20°C/Watt

MIL-STD-810D

10-55Hz, 2G, 30 Min. along X, Y and Z

5% to 95% RH

Nickel-Coated copper

Non-conductive black plastic

Epoxy (UL94-V0)

Level A

Level A

Perf. Criteria 2

Perf. Criteria 2

Perf. Criteria 2

Perf. Criteria 2

Perf. Criteria 2

16g

18g

31.8 x 20.3 x 10.2mm

32.0 x 20.3 x 10.9mm

3.069 x 106 Hours

Notes :

1. The RP03 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under

no-load condition will not damage these devices, however they may not meet all listed specification.

2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).

3. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version.

4. Maximum value at nominal input voltage and full load of standard type.

5. Typical value at nominal input voltage and full load.

6. Test by minimum Vin and constant resistor load.

7. Should an O/O isolation be required, please order the converter with the following part number: RP03-XXXXDB/DS.

8. The “M1” version (RP03-xxxxSB-M1 / RP03-xxxxDB-M1) and the dual-isolated-output-version (RP03-xxxxDS) do not carry the UL certification.

9. See application notes for EMI-filtering.

172

April-2005

www.recom-international.com

Share Link: