HD4043612F データシートの表示（PDF） - Hitachi -> Renesas Electronics

部品番号

コンポーネント説明

メーカー

HD4043612F

4-bit HMCS400-series microcomputer

Hitachi -> Renesas Electronics 

HD404369 Series

Notes: 1. When using the subsystem oscillator (32.768 kHz), one of the following relationships for fOSC

must be applied.

0.4 MHz ≤ fOSC ≤ 1.0 MHz or 1.6 MHz ≤ fOSC ≤ 5.0 MHz

The operating range for fOSC can be set with bit 1 of system clock selection register 1 (SSR1:

$027).

2. The oscillation stabilization time is the period required for the oscillator to stabilize in the

following situations:

a. After VCC reaches 2.7 V at power-on.

b. After RESET input goes low when stop mode is cancelled.

c. After STOPC input goes low when stop mode is cancelled.

To ensure the oscillation stabilization time at power-on or when stop mode is cancelled, RESET

or STOPC must be input for at least a duration of tRC.

When using a crystal or ceramic oscillator, consult with the manufacturer to determine what

stabilization time is required, since it will depend on the circuit constants and stray capacitance.

3. Refer to figure 84.

4. Refer to figure 85.

5. Refer to figure 86.

6. Refer to figure 87.

107

Share Link: