ICX278 データシートの表示（PDF） - Sony Semiconductor

部品番号

コンポーネント説明

メーカー

ICX278

Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras

Sony Semiconductor 

ICX278AK

10. Line crawls

Set to standard imaging condition II. Adjust the luminous intensity so that the average value of the Y signal

output is 200mV, and then insert a white subject and R, G, and B filters and measure the difference

between Y signal lines for the same field (∆Ylw, ∆Ylr, ∆Ylg, ∆Ylb [mV]). Substitute the values into the

following formula.

Lci = (∆Yli/200) × 100 [%] (i = w, r, g, b)

11. Lag

Adjust the Y signal output value generated by strobe light to 200mV. After setting the strobe light so that it

strobes with the following timing, measure the residual signal (Ylag). Substitute the value into the following

formula.

Lag = (Ylag/200) × 100 [%]

FLD

V1

Strobe light

timing

Output

Light

Y signal output 200mV Ylag (lag)

– 12 –

Share Link: