BCcomponents
Polypropylene film foil capacitors
Product specification
KP 460 to 464
QUICK REFERENCE TEST REQUIREMENTS
TEST
Robustness of leads
Tensile:
“IEC 60068-2-21”
Bending:
“IEC 60068-2-21”
Torsion:
Resistance to soldering heat:
“IEC 60068-2-20”
Component solvent resistance
Robustness of component
Vibration:
“IEC 60068-2-6”
Shock:
“IEC 60068-2-27”
Climatic sequence
Dry heat:
“IEC 60068-2-2”
Damp heat, cyclic, test Db,
first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1”
Damp heat, cyclic, test Db,
remaining cycles:
“IEC 60068-2-30”
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3”
Endurance (DC):
“IEC 60384-13”
Variation of capacitance with
temperature:
“IEC 60384-13”
Heat storage:
“IEC 60384-13”
Resistance to soldering heat with
preheating:
“IEC 60384-13”
PROCEDURE
(quick reference)
REQUIREMENTS
load 10 N; 10 s
load 5 N; 4 × 90 °
2 × 180 °
solder bath: 260 °C; 5 s
no visible damage
legible marking
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
isopropyl alcohol; 23 °C; 5 minutes
10 to 55 Hz; amplitude 0.75 mm or
acceleration 98 m/s2; 6 hours
half sinewave; 490 m/s2; 11 ms
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
Rins ≥ 50% of specified value
16 hours; 100 °C
2 hours; −40 °C
∆C/C ≤ 1% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
Rins ≥ 50% of specified value
56 days; 40 °C; 90 to 95% RH
1000 hours;
1.5 × URdc; 85 °C
1.05 × URdc; 100 °C
static method; one cycle
1000 hours; 100 °C
body temperature: 100 °C;
bath temperature: 260 °C;
dwell time: 5 s
∆C/C ≤ 1% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
Rins ≥ 50% of specified value
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
Rins ≥ 100% of specified value
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
Rins ≥ 10 000 MΩ
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
2001 Jun 22
29