LC700 データシートの表示（PDF） - Unspecified
部品番号
コンポーネント説明
メーカー
LC700 Datasheet PDF : 10 Pages
| |||
Patient Care Unit with Standard Laminate or Optional Terreon® Top
LC700, LC750
Installation Instructions
Installation Instructions continued . . .
Step 4: Install the inline backflow preventer (for volume control or foot control)
1. Install the supplied inline backflow preventer to the wall
per local code.
2. Connect the water supply to the inlet of the foot valve (or
volume control valve, based on option supplied).
NOTE The foot valve inlet is located on the backside of the
valve.
3. Connect the outlet of the foot valve (or volume control
valve, based on option supplied) to the inlet of the
backflow preventer.
NOTE The foot valve outlet is located on the topside of the
valve.
4. Connect the outlet of the backflow preventer to the inlet of
the flexible hose.
Figure 10
Step 5: Install the cabinet
1. Install the supplied mounting studs into the
cabinet anchors installed in Step 2 on page 4.
2. Over each mounting stud, screw on a leveling
nut and place a washer over the nut (see Figure
10).
3. With the cabinet floor removed, locate the
cabinet in place over the mounting studs (see
Figure 10).
4. Add a flat washer and securing nut to each
cabinet mounting stud. Level the cabinet and
tighten the nuts.
NOTE FOR OPTIONAL FOOT VALVE: Install the
foot valve with the screws provided to the foot valve
anchors (installed in Step 2 on page 4) and tighten.
Figure 11
5. Connect the flexible hose, hose clamp, pipe and inlet nut to the water closet as shown in Figure 3
on page 3. Hand-tighten the inlet nut.
6. Connect the flexible hose to the flush valve (see Figure 11).
6
8/16/04
Bradley Corporation • 215-1171 Rev. D; EN 04-1037
Share Link: 