LPC2101 データシートの表示（PDF） - Philips Electronics
部品番号
コンポーネント説明
メーカー
LPC2101 Datasheet PDF : 32 Pages
| |||
Philips Semiconductors
LPC2101/2102/2103
Single-chip 16-bit/32-bit microcontrollers
7. Limiting values
Table 4: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). [1]
Symbol Parameter
Conditions
VDD(1V8)
VDD(3V3)
VDDA
Vi(VBAT)
VIA
VI
supply voltage (1.8 V)
supply voltage (3.3 V)
analog 3.3 V pad supply voltage
input voltage on pin VBAT
analog input voltage
input voltage
for the RTC
5 V tolerant I/O
pins
other I/O pins
IDD
ISS
Tstg
Ptot(pack)
supply current
ground current
storage temperature
total power dissipation (per package)
based on package
heat transfer, not
device power
consumption
Min
[2] −0.5
[3] −0.5
−0.5
−0.5
[4] −0.5
[5] [6] −0.5
[5] −0.5
[8] -
[10] -
[11] −40
-
Max
Unit
+2.5
V
+3.6
V
4.6
V
4.6
V
5.1
V
6.0
V
VDD + 0.5 [7] V
100 [9]
mA
100 [9]
mA
125
°C
1.5
W
[1] The following applies to the Limiting values:
a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.
b) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to VSS unless
otherwise noted.
[2] Core and internal rail.
[3] External rail.
[4] On ADC related pins.
[5] Including voltage on outputs in 3-state mode.
[6] Only valid when the VDD(3V3) supply voltage is present.
[7] Not to exceed 4.6 V.
[8] Per supply pin.
[9] The peak current is limited to 25 times the corresponding maximum current.
[10] Per ground pin.
[11] Dependent on package type.
LPC2101_02_03_1
Preliminary data sheet
Rev. 01 — 18 January 2006
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
21 of 32
Share Link: 