LPC2119 データシートの表示（PDF） - Philips Electronics

部品番号

コンポーネント説明

メーカー

LPC2119

Single-chip 16/32-bit microcontrollers; 128/256 kB ISP/IAP Flash with 10-bit ADC and CAN

Philips Electronics 

Philips Semiconductors

LPC2119/LPC2129

Single-chip 16/32-bit microcontrollers

6.4 Memory map

The LPC2119/LPC2129 memory maps incorporate several distinct regions, as shown

in the following figures.

In addition, the CPU interrupt vectors may be re-mapped to allow them to reside in

either Flash memory (the default) or on-chip static RAM. This is described in Section

6.20 “System control”.

4.0 GB

3.75 GB

3.5 GB

AHB PERIPHERALS

VPB PERIPHERALS

0xFFFF FFFF

0xF000 0000

0xEFFF FFFF

0xE000 0000

0xDFFF FFFF

3.0 GB

RESERVED ADDRESS SPACE

0xC000 0000

9397 750 12806

Preliminary data

2.0 GB

1.0 GB

BOOT BLOCK (RE-MAPPED FROM

ON-CHIP FLASH MEMORY

RESERVED ADDRESS SPACE

16 KBYTE ON-CHIP STATIC RAM

0x8000 0000

0x7FFF FFFF

0x7FFF E000

0x7FFF DFFF

0x4001 0000

0x4000 3FFF

0x4000 0000

0x3FFF FFFF

RESERVED ADDRESS SPACE

0.0 GB

256 KBYTE ON-CHIP FLASH MEMORY (LPC2129)

128 KBYTE ON-CHIP FLASH MEMORY (LPC2119)

0x0004 0000

0x0003 FFFF

0x0002 0000

0x0001 FFFF

0x0000 0000

002aaa664

Fig 3. LPC2119/LPC2129 memory map.

6.5 Interrupt controller

The Vectored Interrupt Controller (VIC) accepts all of the interrupt request inputs and

categorizes them as FIQ, vectored IRQ, and non-vectored IRQ as defined by

programmable settings. The programmable assignment scheme means that priorities

of interrupts from the various peripherals can be dynamically assigned and adjusted.

Rev. 02 — 02 February 2004

© Koninklijke Philips Electronics N.V. 2004. All rights reserved.

10 of 36

Share Link: