AD7468BRM データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

AD7468BRM

1.8V; 450mW; micro-power, 8/10/12-bit ADC. For battery powered systems, madical instruments, remote data acquisition, isolated data acquisition

Analog Devices 

THEORY OF OPERATION

CIRCUIT INFORMATION

The AD7466/AD7467/AD7468 are fast, micropower, 12-bit,

10-bit, and 8-bit ADCs, respectively. The parts can be operated

from a 1.6 V to 3.6 V supply. When operated from any supply

voltage within this range, the AD7466/AD7467/AD7468 are

capable of throughput rates of 200 kSPS when provided with a

3.4 MHz clock.

The AD7466/AD7467/AD7468 provide the user with an on-

chip track-and-hold, an ADC, and a serial interface housed in a

tiny 6-lead SOT-23 or an 8-lead MSOP package, which offer the

user considerable space-saving advantages over alternative

solutions. The serial clock input accesses data from the part, but

also provides the clock source for the successive approximation

ADC. The analog input range is 0 V to VDD. An external refer-

ence is not required for the ADC, and there is no on-chip

reference. The reference for the AD7466/AD7467/AD7468 is

derived from the power supply, thus giving the widest possible

dynamic input range.

The AD7466/AD7467/AD7468 also feature an automatic

power-down mode to allow power savings between conversions.

The power-down feature is implemented across the standard

serial interface, as described in the Normal Mode section.

CONVERTER OPERATION

The AD7466/AD7467/AD7468 are successive approximation

analog-to-digital converters based around a charge redistribu-

tion DAC. Figure 19 and Figure 20 show simplified schematics

of the ADC. Figure 19 shows the ADCs during the acquisition

phase. SW2 is closed and SW1 is in Position A, the comparator

is held in a balanced condition, and the sampling capacitor

acquires the signal on VIN.

CHARGE

REDISTRIBUTION

DAC

SAMPLING

A CAPACITOR

VIN

SW1

B

ACQUISITION

PHASE

SW2

CONTROL

LOGIC

AGND

COMPARATOR

VDD/2

Figure 19. ADC Acquisition Phase

When the ADC starts a conversion, as shown in Figure 20,

SW2 opens and SW1 moves to Position B, causing the com-

parator to become unbalanced. The control logic and the

charge redistribution DAC are used to add and subtract fixed

amounts of charge from the sampling capacitor to bring the

comparator back into a balanced condition. When the com-

parator is rebalanced, the conversion is complete. The control

logic generates the ADC output code. Figure 21 shows the ADC

transfer function.

AD7466/AD7467/AD7468

CHARGE

REDISTRIBUTION

DAC

SAMPLING

A CAPACITOR

VIN

SW1

B CONVERSION

SW2

PHASE

CONTROL

LOGIC

AGND

VDD/2

COMPARATOR

Figure 20. ADC Conversion Phase

ADC TRANSFER FUNCTION

The output coding of the AD7466/AD7467/AD7468 is straight

binary. The designed code transitions occur at successive

integer LSB values; that is, 1 LSB, 2 LSB, and so on. The LSB size

for the devices is as follows:

VDD/4096 for the AD7466

VDD/1024 for the AD7467

VDD/256 for the AD7468

The ideal transfer characteristics for the devices are shown in

Figure 21.

111...111

111...110

111...000

011...111

000...010

000...001

000...000

0V 1LSB

1LSB = VDD/4096 (AD7466)

1LSB = VDD/1024 (AD7467)

1LSB = VDD/256 (AD7468)

+VDD – 1LSB

ANALOG INPUT

Figure 21. AD7466/AD7467/AD7468 Transfer Characteristics

TYPICAL CONNECTION DIAGRAM

Figure 22 shows a typical connection diagram for the devices.

VREF is taken internally from VDD and, therefore, VDD should

be well decoupled. This provides an analog input range of

0 V to VDD.

240μA 0.1μF

2.5V

1μF

TANT

REF192

10μF

0.1μF

5V

SUPPLY

680nF

0V TO VDD

INPUT

VDD

VIN

GND

SCLK

AD7466 SDATA

CS

μC/μP

SERIAL

INTERFACE

Figure 22. REF192 as Power Supply to AD7466

Rev. C | Page 17 of 28

Share Link: