M28W160ECB データシートの表示（PDF） - Numonyx -> Micron

部品番号

コンポーネント説明

メーカー

M28W160ECB

16 Mbit (1Mb x16, Boot Block) 3V Supply Flash Memory

Numonyx -> Micron 

M28W160ECT, M28W160ECB

APPENDIX C. FLOWCHARTS AND PSEUDO CODES

Figure 17. Program Flowchart and Pseudo Code

Start

Write 40h or 10h

Write Address

& Data

Read Status

Register

program_command (addressToProgram, dataToProgram) {:

writeToFlash (any_address, 0x40) ;

/*or writeToFlash (any_address, 0x10) ; */

writeToFlash (addressToProgram, dataToProgram) ;

/*Memory enters read status state after

the Program Command*/

do {

status_register=readFlash (any_address) ;

/* E or G must be toggled*/

NO

b7 = 1

YES

NO

b3 = 0

YES

NO

b4 = 0

YES

NO

b1 = 0

YES

End

VPP Invalid

Error (1, 2)

Program

Error (1, 2)

Program to Protected

Block Error (1, 2)

} while (status_register.b7== 0) ;

if (status_register.b3==1) /*VPP invalid error */

error_handler ( ) ;

if (status_register.b4==1) /*program error */

error_handler ( ) ;

if (status_register.b1==1) /*program to protect block error */

error_handler ( ) ;

}

AI03538b

Note: 1. Status check of b1 (Protected Block), b3 (VPP Invalid) and b4 (Program Error) can be made after each program operation or after

a sequence.

2. If an error is found, the Status Register must be cleared before further Program/Erase Controller operations.

40/50

Share Link: