M50LPW080N データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

M50LPW080N

8 Mbit (1M x8, Uniform Block) 3V Supply Low Pin Count Flash Memory

STMicroelectronics 

M50LPW080

MAXIMUM RATING

Stressing the device above the rating listed in the

Absolute Maximum Ratings table may cause per-

manent damage to the device. These are stress

ratings only and operation of the device at these or

any other conditions above those indicated in the

Operating sections of this specification is not im-

plied. Exposure to Absolute Maximum Rating con-

ditions for extended periods may affect device

reliability. Refer also to the STMicroelectronics

SURE Program and other relevant quality docu-

ments.

Table 16. Absolute Maximum Ratings

Symbol

Parameter

Min.

Max.

Unit

TSTG

Storage Temperature

–65

150

°C

TLEAD

Lead Temperature during Soldering

See note 1

°C

VIO

Input or Output range 2

–0.60 VCC + 0.6

V

VCC

Supply Voltage

–0.60

4

V

VPP

Program Voltage

–0.6

13

V

VESD

Electrostatic Discharge Voltage (Human Body model) 3

–2000

2000

V

Note: 1. Compliant with JEDEC Std J-STD-020B (for small body, Sn-Pb or Pb assembly), the ST ECOPACK® 7191395 specification, and

the European directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU

2. Minimum voltage may undershoot to –2V for less than 20ns during transitions. Maximum voltage may overshoot to VCC + 2V for

less than 20ns during transitions.

3. JEDEC Std JESD22-A114A (C1=100 pF, R1=1500 Ω, R2=500 Ω)

24/44

Share Link: