HL15203
10. INH and Display Control
Since the LSI internal data (D1 to D156, DR, SC, and BU) is undefined when
power is first applied, then display is off(SEG1 to SEG52,COM1 to COM3=low)
by setting the INH pin low at the same time as power is applied.Then meaningless
display at the power-on can be prevented by transferring serial data from the
controller while the display is off and setting INH pin high after the transfer completes.
••
VDD
R
•
INH
C
VDD
INH
CE
Internal data
VIL
t1
t2
VIL
Transfer of display
and control data
Undefined
Defined
t1 : Determined by the value of C and R
t2 : 10µs(minimum)
12
Preliminary