MACH211SP-10JI データシートの表示（PDF） - Advanced Micro Devices
部品番号
コンポーネント説明
メーカー
MACH211SP-10JI Datasheet PDF : 37 Pages
| |||
SWITCHING CHARACTERISTICS over INDUSTRIAL operating ranges (Note 2) (continued)
Parameter
Symbol
Parameter Description
-10
Min Max
-12
Min Max Unit
tSLL
Setup Time from Input, I/O, or Feedback Through Transparent Input
Latch to Output Latch Gate
8.5
10.5
ns
tIGS
Input Latch Gate to Output Latch Setup
11
13.5
ns
tWIGL Input Latch Gate Width LOW
5
6
ns
tPDLL
Input, I/O, or Feedback to Output Through Transparent Input and
Output Latches
14
17
ns
tAR
Asynchronous Reset to Registered or Latched Output
15
19.5 ns
tARW Asynchronous Reset Width (Note 1)
10
12
ns
tARR Asynchronous Reset Recovery Time (Note 1)
10
10
ns
tAP
Asynchronous Preset to Registered or Latched Output
15
18
ns
tAPW Asynchronous Preset Width (Note 1)
10
12
ns
tAPR Asynchronous Preset Recovery Time (Note 1)
10
10
ns
tEA
Input, I/O, or Feedback to Output Enable (Note 1)
15
15
ns
tER
Input, I/O, or Feedback to Output Disable (Note 1)
15
15
ns
tLP
tPD Increase for Powered-down Macrocell (Note 3)
10
10
ns
tLPS
tS Increase for Powered-down Macrocell (Note 3)
10
10
ns
tLPCO tCO Increase for Powered-down Macrocell (Note 3)
0
0
ns
tLPEA tEA Increase for Powered-down Macrocell (Note 3)
10
10
ns
Notes:
1. These parameters are not 100% tested, but are evaluated at initial characterization and at any time the design is modified
where capacitance may be affected.
2. See Switching Test Circuit for test conditions.
3. If a signal is powered-down, this parameter must be added to its respective high-speed parameter.
18
MACH211SP-10/12 (Ind)
Share Link: 