LC9947G データシートの表示（PDF） - SANYO -> Panasonic

部品番号

コンポーネント説明

メーカー

LC9947G

1/5-Inch Optical Size EIA Black-and-White Solid-State Imaging Device

SANYO -> Panasonic 

LC9947G

5. Notes on mounting

• The use of a lens with an optical size of over 1/5 inch can result in flare. Consult your Sanyo sales representative

before selecting a lens.

• This product is mounted in a fully clear plastic package, and is susceptible to light entering from the back of the

printed circuit board that it is mounted on. Therefore end products must provide adequate protection from stray

light.

6. Notes on delivering

• Do not throw or drop packages containing this device.

• Do not allow these devices to be exposed to moisture in inclement weather such as rain or snow.

• Keep mechanical vibrations and shocks applied to the device packing to a minimum during transport.

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any and all SANYO products described or contained herein fall under strategic

products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of

Japan, such products must not be exported without obtaining export license from the Ministry of

International Trade and Industry in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co., Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of February, 1999. Specifications and information herein are subject

to change without notice.

No. 4971-9/9

Share Link: