MB3800 データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

メーカー

MB3800

BIPOLAR Switching Regulator Controller(Low Voltage)

Fujitsu 

MB3800

■ NOTES ON USE

• Take account of common impedance when designing the earth line on a printed wiring board.

• Take measures against static electricity.

- For semiconductors, use antistatic or conductive containers.

- When storing or carrying a printed circuit board after chip mounting, put it in a conductive bag or container.

- The work table, tools and measuring instruments must be grounded.

- The worker must put on a grounding device containing 250 kΩ to 1 MΩ resistors in series.

• Do not apply a negative voltage

- Applying a negative voltage of −0.3 V or less to an LSI may generate a parasitic transistor, resulting in

malfunction.

■ ORDERING INFORMATION

Part number

MB3800PF-❏❏❏

MB3800PNF-❏❏❏

MB3800PFV-❏❏❏

MB3800PF-❏❏❏E1

MB3800PNF-❏❏❏E1

MB3800PFV-❏❏❏E1

Package

8-pin Plastic SOP

(FPT-8P-M01)

8-pin Plastic SOP

(FPT-8P-M02)

8-pin Plastic SSOP

(FPT-8P-M03)

8-pin Plastic SOP

(FPT-8P-M01)

8-pin Plastic SOP

(FPT-8P-M02)

8-pin Plastic SSOP

(FPT-8P-M03)

Remarks

Conventional version

Conventional version

Conventional version

Lead Free version

Lead Free version

Lead Free version

■ RoHS Compliance Information of Lead (Pb) Free version

The LSI products of Fujitsu with “E1” are compliant with RoHS Directive , and has observed the standard of

lead, cadmium, mercury, Hexavalent chromium, polybrominated biphenyls (PBB) , and polybrominated diphenyl

ethers (PBDE) .

The product that conforms to this standard is added “E1” at the end of the part number.

13

Share Link: