MB3813 データシートの表示（PDF） - Fujitsu
部品番号
コンポーネント説明
メーカー
MB3813 Datasheet PDF : 22 Pages
| |||
MB3813A/MB3833A/MB3843
To Top / Lineup / Index
s USAGE PRECAUTION
1. Device settings must not exceed absolute maximum ratings.
Usage under conditions exceeding absolute maximum ratings may permanently damage LSI devices.
Note also that in normal operation usage within recommended operating conditions is preferred, and that the
reliability of LSI devices may be adversely affected when used outside these conditions.
2. Devices should be used within recommended operating conditions.
Recommended operating conditions are recommended values within which the LSI device is warranted to
operate normally.
Rated values of electrical characteristics are warranted within the range of recommended operating conditions
and within the conditions listed in the condition column for each parameter.
3. Printed circuit board ground lines should be designed in consideration of common
impedance values.
4. Observe precautions against static electricity.
• Containers in which semiconductors are placed should either be protected against static electricity, or be of
conductive material.
• After devices are mounted, use conductive bags or conductive containers when storing or transporting printed
circuit boards.
• Working surfaces, tools and instruments should be properly rounded.
• Workers should be grounded by a ground line with 250 kΩ to 1 MΩ resistance in series between the worker
and ground.
s ORDERING INFORMATION
Part number
MB3813APFV-G-BND
MB3833APFV-G-BND
MB3843PFV-G-BND
Package
16-pin Plastic SSOP
(FPT-16P-M05)
Remarks
20
Share Link: 