MB89160 データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

メーカー

MB89160

8-bit Proprietary Microcontroller

Fujitsu 

MB89160/160A Series

s PROGRAMMING TO THE EPROM ON THE MB89P165

The MB89P165 is an OTPROM version of the MB89160 series.

1. Features

• 32-Kbyte PROM on chip

• Options can be set using the EPROM programmer.

• Equivalency to the MBM27C256A in EPROM mode (when programmed with the EPROM programmer)

2. Memory Space

Memory space in each mode such as 32-Kbyte PROM, option area is diagrammed below.

Address

0000H

0080H

0280H

Single-chip

I/O

RAM

EPROM mode

(Corresponding addresses on the EPROM programmer)

Not available

8000H

C000H

Not available

Not available

Not available

0000H

3FF0H

3FF6H

4000H

Not available

Option area

Not available

PROM

16 KB

EPROM

16 KB

FFFFH

7FFFH

3. Programming to the EPROM

In EPROM mode, the MB89P165 functions equivalent to the MBM27C256A. This allows the PROM to be

programmed with a general-purpose EPROM programmer (the electronic signature mode cannot be used) by

using the dedicated socket adapter.

When the operating area for a single chip is 16 Kbyte (C000H to FFFFH) the PROM can be programmed as follows:

• Programming procedure

(1) Set the EPROM programmer to the MBM27C256A.

(2) Load program into the EPROM programmer at 4000H to 7FFFH.

(Note that addresses C000H to FFFFH while operating as a single chip assign to 4000H to 7FFFH in EPROM

mode.)

Load option data into address 3FF0H to 3FF5H of the EPROM programmer.

(For information about each corresponding option, see “8. Setting OTPROM Options.”)

(3) Program with the EPROM programmer.

17

Share Link: