MB89470 Series
s PROGRAMMING TO THE EPROM WITH PIGGYBACK/EVALUATION DEVICE
1. EPROM for Use
MBM27C256A-20TVM
2. Programming Socket Adapter
To program to the PROM using an EPROM programmer, use the socket adapter (manufacturer : Sunhayato
Corp.) listed below.
Package
Adapter socket part number
LCC-32 (Square)
ROM-32LC-28DP-S
Inquiry : Sunhayato Corp. : TEL 81-(3)-3984-7791
FAX 81-(3)-3971-0535
E-mail : adapter@sunhayato.co.jp
3. Memory Space
Memory space in each mode is diagrammed below.
Address
0000H
0080H
0880H
8000H
Normal operating
mode
I/O
RAM
Not available
Corresponding addresses on
the EPROM programmer
0000H
PROM
32 KB
EPROM
32 KB
FFFFH
7FFFH
4. Programming to the EPROM
(1) Set the EPROM programmer to the MBM27C256.
(2) Load program data into the EPROM programmer at 0000H to 7FFFH.
(3) Program to 0000H to 7FFFH with the EPROM programmer.
16