MB89580B データシートの表示（PDF） - Fujitsu
部品番号
コンポーネント説明
メーカー
MB89580B Datasheet PDF : 37 Pages
| |||
MB89580B/580BW series
s PRODUCT LINEUP
Part number
MB89583B MB89585B MB89P585B MB89589B MB89P589B MB89583BW MB89585BW MB89P585BW
Parameter
ROM size
8 KB
16 KB
8 KB
16 KB
RAM size
512 B
1 KB
18 KB
512 B
1 KB
Package
LQFP-64 (FPT-64P-M03)
LQFP-64
(FPT-64P-M09)
LQFP-64 (FPT-64P-M03)
Operation at USB
reset
High impedance state
Low-level output
Others
MASK product
OTP/EVA MASK OTP/EVA
product product product
MASK product
OTP/EVA
product
CPU functions
Number of instructions
Instruction bit length
Instruction length
Data bit length
Minimum execution time
Interrupt processing time
: 136
: 8 bits
: 1 to 3 bytes
: 1, 8, and 16 bits
: 0. 33 µs (6 MHz)
: 3 µs (6 MHz)
General-
purpose
ports
General-purpose I/O ports
General-purpose output ports
General-purpose input ports
(34 : CMOS, 3 : Nch open drain)
(8 : CMOS)
(8 : CMOS 3.3 V input)
Parallel
ports
Shares eight (P40 through P47) of the above general-purpose I/O ports.
Allows asynchronous read and write by external signals.
An interrupt function is available to set data.
Periph- USB
eral function
func-
tions
PWM timer
Can be set to full/low speed.
Four endpoints at maximum
Power supply mode : Can be set to own power supply/bus power supply mode.
FIFO 8 bits × 8 built in
Built-in DMAC (Can be set to DMA transfer to the internal RAM or to the external FIFO.)
8-bit PWM timer operation × 2 channels (can also be used as a PPG × 1 channel timer)
UART
SIO
Allows switching between UART (clock-synchronous/asynchronous data transfer allowed)
and SIO (simple serial transfer) .
Timebase
timer
21-bit timebase timer
Clock
output
Allows output of two main clock divisions
Standby mode
Sleep mode and Stop mode
s PACKAGES AND CORRESPONDING PRODUCTS
Package
FPT-64P-M03
FPT-64P-M09
: Available
MB89583B MB89585B MB89P585B MB89589B MB89P589B MB89583BW MB89585BW MB89P585BW
×
×
×
×
×
×
×
×
× : Not available
3
Share Link: 