MB90F543 データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

メーカー

MB90F543

16-bit Proprietary Microcontroller

Fujitsu 

MB90540/540G/545/545G Series

Pin No.

LQFP*2 QFP*1

Pin name

46

48

P57

TOT0

51 to 56 53 to 58

P70 to P75

IN0 to IN5

P76 , P77

57 , 58 59 , 60 OUT2 , OUT3

IN6 , IN7

59 , 62 61 to 64

P80 to P83

PPG0 to

PPG3

63 , 64

P84 , P85

65 , 66

OUT0 , OUT1

65

67

P86

TIN1

66

68

P87

TOT1

P90 to P93

67 to 70 69 to 72

INT0 to INT3

P94

71

73

TX0

12

Circuit

type

D

D

D

D

D

D

D

D

D

Function

General I/O port. This function is enabled when the 16-bit

reload timers 0 disables the output.

Output pin for the 16-bit reload timers 0. This function is

enabled when the 16-bit reload timers 0 enables the output.

General I/O ports. This function is always enabled.

Trigger input pins for input captures ICU0 to ICU5. Set the cor-

responding Port Direction Register to input if this

function is used.

General I/O ports. This function is enabled when the OCU

disables the waveform output.

Event output pins for output compares OCU2 and OCU3. This

function is enabled when the OCU enables the waveform out-

put.

Trigger input pins for input captures ICU6 and ICU7. Set the

corresponding Port Direction Register to input and disable the

OCU waveform output if this function is used.

General I/O ports. This function is enabled when 8/16-bit PPG

disables the waveform output.

Output pins for 8/16-bit PPGs. This function is enabled when

8/16-bit PPG enables the waveform output.

General I/O ports. This function is enabled when the OCU

disables the waveform output.

Waveform output pins for output compares OCU0 and OCU1.

This function is enabled when the OCU enables the waveform

output.

General I/O port. This function is always enabled.

Input pin for the 16-bit reload timers 1. Set the

corresponding Port Direction Register to input if this function is

used.

General I/O port. This function is enabled when the 16-bit

reload timers 0 disables the output.

Output pin for the 16-bit reload timers 1.This function is

enabled when the 16-bit reload timers 1 enables the output.

General I/O port. This function is always enabled.

External interrupt request input pins for INT0 to INT3. Set the

corresponding Port Direction Register to input if this function is

used.

General I/O port. This function is enabled when CAN0 disables

the output.

TX output pin for CAN0. This function is enabled when CAN0

enables the output.

(Continued)

Share Link: