MC9S12DJ512 データシートの表示（PDF） - Freescale Semiconductor

部品番号

コンポーネント説明

メーカー

MC9S12DJ512

MC9S12DP512 Device Guide V01.25

Freescale Semiconductor 

Revision History

DOCUMENT NUMBER

9S12DP512DGV1/D

Version Revision Effective

Number Date

Date

V01.00

27 Nov

2001

11 Feb

2002

V01.01

13 Mar

2002

13 Mar

2002

V01.02

V01.03

V01.04

02 Apr

2002

15 Apr

2002

06 Jun

2002

02 Apr

2002

15 Apr

2002

06 Jun

2002

V01.05

05 Jul

2002

05 Jul

2002

Author

Description of Changes

- Initial version based on DP256 V2.09.

- Updated document formats.

- Removed reference to SIM in overview.

- Changed XCLKS to PE7 in signal description.

- Removed "Oscillator start-up time from POR or STOP" from Oscillator

Characterisitcs.

- Changed VDD and VDDPLL to 2.35V.

- Updated CINS.

- Updated IOL/IOH values.

- Updated input capacitance.

- Updated NVM timing characteristics.

- Updated document reference (SPI, SCI).

- Corrected values in device memory map (RAM start, flash protected

sector sizes).

- Updated document reference (SCI).

- Changed all operating frequency references to 50MHz EXTAL and

removed references to 80 pin LQFP.

- Preface Table "Document References": Changed to full naming for

each block.

- Table "Interrupt Vector Locations", Column "Local Enable": Corrected

several register and bit names.

- Table "Signal Properties": Added column "Internal Pull Resistor".

- Table "PLL Characteristics": Updated parameters K1 and f1

- Figure "Basic Pll functional diagram": Inserted XFC pin in diagram

- Enhanced section "XFC Component Selection"

- Added to Sections ATD, ECT and PWM: freeze mode = active BDM

mode.

Freescale reserves the right to make changes without further notice to any products herein to improve reliability, function or

design.Freescale does not assume any liability arising out of the application or use of any product or circuit described herein;

neither does it convey any license under its patent rights nor the rights of others.Freescale products are not designed, intended,

or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to

support or sustain life, or for any other application in which the failure of the Freescale product could create a situation where

personal injury or death may occur. Should Buyer purchase or use Freescale products for any such unintended or unauthorized

application, Buyer shall indemnify and hold Freescale and its officers, employees, subsidiaries, affiliates, and distributors harmless

against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of

personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale was

negligent regarding the design or manufacture of the part.

Share Link: