MF0064M-07AT PDF VIEW DOWNLOAD, MF0064M-07AT データシート

MF0064M-07AT データシートの表示（PDF） - Mitsumi

部品番号

コンポーネント説明

メーカー

MF0064M-07AT

8/16-bit Data Bus Flash ATA PC Card

Mitsumi

MF0064M-07AT Datasheet PDF : 32 Pages

First Prev 11 12 13 14 15 16 17 18 19 20 Next Last

MITSUBISHI STORAGE CARD

Preliminary

ATA Register Specifications

Data Register

This register is a 16 bit register which is used to transfer

data blocks between the card data buffer and the host. Data

may be transferred by either a series of word accesses to

the Data register or a series of byte accesses to the Data

D15 D14 D13 D12 D11 D10 D9

Data Word

Odd Data Byte

Data Word

Data Byte

Error Register

This register contains additional information about the

source of an error which has occurred in processing of the

preceding command. This register should be checked by

the host when ERR bit in the Status register is set. The

Error register is a read only register.

BBK UNC

0 IDNF

ABRT

0 AMN

Field

BBK

UNC

IDNF

ABRT

AMNF

function

This bit is set when a Bad Block is detected in requested ID

field. Host can not read/write on data area that is marked as

a Bad Block.

This bit is set when Uncorrectable error is occurred at

reading the card.

The requested sector ID is in error or cannot be found.

This bit is set if the command has been aborted because of

the card status condition. (Not ready, Write fault, etc.) or

when an invalid command has been issued.

This bit is set in case of a general error.

Feature Register

This register is written by the host to provide command

specific information to the drive regarding features of the

drive which the host wish to utilize. The Feature register is

a write only register.

Feature byte

Sector Count Register

This register is written by the host with the number of

sectors or blocks to be processed in the subsequent

command. After the command is complete, the host may

read this register to obtain the count of sectors left

unprocessed by the command.

Sector Count

ATA PC CARDS

Sector Number Register

This register is written by the host with the starting sector

number to be used in the subsequent Cylinder-Head-Sector

command. After the command is complete, the host may

read the final sector number from this register. When

logical block addressing is used, this register is written by

the host with bit7 to 0 of the starting logical block number

and contains bit7 to 0 of the final logical block number

after the command is complete.

Sector Number

Logical Block Number bits A07-A00(LBA Addressing)

Cylinder Low Register

This register is written by the host with the low-order byte

of the starting cylinder address to be used in the

subsequent Cylinder-Head-Sector command. After the

command is complete, the host may read the low-order

byte of the final cylinder number from this register. When

logical block addressing is used, this register is written by

the host with bits15 to 8 of the starting logical block

number and contains bits15 to 8 of the final logical block

number after the command complete.

Cylinder Low Byte

Logical Block Number bits A15-A08(LBA Addressing)

Cylinder High Register

This register is written by the host with the high-order byte

of the starting cylinder address to be used in the

subsequent Cylinder-Head-Sector command. After the

command is complete, the host may read the high-order

byte of the final cylinder number from this register. When

logical block addressing is used, this register is written by

the host with bits 23 to 16 of the starting logical block

number and contains bits23 to 16 of the final logical block

number after the command is complete.

Cylinder High Byte

Logical Block Number bits A23-A16(LBA Addressing)

MITSUBISHI

ELECTRIC

Oct.1999 Rev. 0.2

Share Link: